Bass Fishing HomeBass Fishing Forums

Go Back   BassFishin.Com Forums > Serious Conversation Only > General Bass Fishing Topics

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-22-13, 08:52 AM   #1
syd
BassFishin.Com Active Member
 
Join Date: Dec 2008
Location: Rocky Mount Va
Posts: 127
Default Reel maintenance

I have to admit when it comes to reel maintenance i try but i don't think i am doing a very good job.
I oil my reels at least once or twice each season. But when it comes to grease etc. i am totally lost.
I have tried once to take a reel apart and service it and failed badly.
I have 2 Revo S reels that both are making a singing type noise. I feel sure it is a bearing going bad.
My question is this. I know i need to get bearings but are all the bearings in these reels the same size or do i need to pinpoint the bad bearing to replace?
I have some tournament friends who do a Saturday reel servicing party in December. They have told me to just bring all my reels and we will go through them too.
I would like to have any parts i need by that time. Plus this will be a great way to help me learn how to take care of my equipment.
Any help greatly appreciated.
syd is offline   Reply With Quote
Old 11-22-13, 11:50 AM   #2
OkobojiEagle
BassFishin.Com Active Member
 
OkobojiEagle's Avatar
 
Join Date: Mar 2011
Location: NW Iowa
Posts: 270
Default

Is my assumption correct that the "singing" is happening during the cast? If so, the spool bearings would be my first point of inspection. Rarely I've had centrifugal brake blocks lightly squeal when they had gotten worn. Reel maintenance is a good thing... good luck.

oe
OkobojiEagle is offline   Reply With Quote
Old 11-22-13, 01:13 PM   #3
syd
BassFishin.Com Active Member
 
Join Date: Dec 2008
Location: Rocky Mount Va
Posts: 127
Default

Correct it is when i am casting.
syd is offline   Reply With Quote
Old 11-22-13, 02:27 PM   #4
bassinbob
BassFishin.Com Super Veteran
 
bassinbob's Avatar
 
Join Date: Nov 2004
Location: Pitts. Pa.
Posts: 3,801
Default

Hey Syd that reel party is a real good idea. Wish there were some guys around here that I could start one with. I can do a very limited amount of reel maintenance if I work hard at it. I tried to go further once with a Citica. It's now in a box all in pieces. I just couldn't get it back together. I even watched a vid on doing the task yourself. One day I'll mail it out to get fixed.
I assume you followed your guide on oiling and applying grease to your reel. That's what
I do with mine. Usually works for any noise my reels start making.
If you feel it is the bearings it probably would benefit you to get a good set of new ones and replace the old anyways.
__________________
you can have my fishin rod when ya take it from my cold dead hands
bassinbob is offline   Reply With Quote
Old 11-22-13, 02:42 PM   #5
woody
BassFishin.Com Super Veteran
 
woody's Avatar
 
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
Default

Hey Syd, I'm sure Proreel will be chimming in soon on this, he's our resident reel specialist.


-Mark
woody is offline   Reply With Quote
Old 11-22-13, 08:55 PM   #6
MallenManson
BassFishin.Com Premier Elite
 
MallenManson's Avatar
 
Join Date: Mar 2009
Location: Beulah, Michigan
Posts: 6,431
Send a message via Yahoo to MallenManson
Default

Quote:
Originally Posted by woody View Post
Hey Syd, I'm sure Proreel will be chimming in soon on this, he's our resident reel specialist.


-Mark
You beat me to it!
__________________
Bass fear me.
Women pepperspray me.....
MallenManson is offline   Reply With Quote
Old 11-22-13, 10:05 PM   #7
Tavery5
BassFishin.Com Super Veteran
 
Tavery5's Avatar
 
Join Date: Dec 2009
Location: Wichita, KS
Posts: 2,427
Default

If you decide to replace the spool bearings on your Revo S you will want to order two different bearings. The one in the palm side plate is a 3 X 10 X 4mm and the one on the spool is a 5 X 11 X 4mm. You can order them as a set from Boca Bearings PN FR-029C-Y-LD, these are ABEC 5 ceramics with stainless races.

I would strongly suggest removing the bearings you have now, give them a good cleaning in acetone, lightly oil them and give them a try, I think you will be surprised how good they will be after a proper cleaning.

One word of caution, if you decide to remove the bearing on the spool, you will need a special tool to remove the pin from the spool shaft, if you fail to use the proper tool there is a good chance you will damage the spool.
__________________
They call me Ishmael
Tavery5 is offline   Reply With Quote
Old 11-22-13, 10:29 PM   #8
keithdog
BassFishin.Com Premier Elite
 
keithdog's Avatar
 
Join Date: Jul 2006
Location: IN
Posts: 8,308
Default

Any more, if I have any trouble with a reel I want to keep optimal, it's getting sent to Proreel. He is the best reel repair expert around.
__________________
Just one more cast, and then some!
keithdog is offline   Reply With Quote
Old 11-23-13, 01:43 PM   #9
nobass
BassFishin.Com Super Veteran
 
Join Date: Jul 2003
Location: clarksville, tn,
Posts: 1,690
Default

proreel without a doubt. he has fair rates. dose outstanding work. best of all he is honest
__________________
the only easy day was yesterday
nobass is offline   Reply With Quote
Old 11-23-13, 02:29 PM   #10
pro reel
BassFishin.Com Veteran Member
 
pro reel's Avatar
 
Join Date: Oct 2010
Location: Wichita Kansas
Posts: 761
Default

If the reel cranks and casts smooth, but makes a squeal , a shriek or a chittering noise during the cast, then it's most likley dry brake tabs and a dry brake ring. It happend to me a lot with my revos. The reel would be fine in the morning then it would just slowly start making a little noise. Add a drop of oil to each brake tab and then use a Qtip soaked with oil to swab the brass brake ring.

If your bearings are bad enough to make noise, then you will most likley feel it during cranking.
pro reel is offline   Reply With Quote
Old 11-25-13, 09:00 AM   #11
syd
BassFishin.Com Active Member
 
Join Date: Dec 2008
Location: Rocky Mount Va
Posts: 127
Default

Thanks for the answers. I printed the page so i will have the info.
syd is offline   Reply With Quote
Old 11-27-13, 05:59 PM   #12
DVT Mike
BassFishin.Com Active Member
 
DVT Mike's Avatar
 
Join Date: Nov 2010
Location: Milford,PA
Posts: 312
Default

I don't usually oil the brakes but it won't hurt. More importantly, clean the tabs and drum with alcohol to remove dust, oxidation etc. As Tavery suggests, service the stock bearings before committing to replacement.
__________________
Visit us at www.delawarevalleytackle.com
DVT Mike is offline   Reply With Quote
Old 11-28-13, 12:13 AM   #13
pro reel
BassFishin.Com Veteran Member
 
pro reel's Avatar
 
Join Date: Oct 2010
Location: Wichita Kansas
Posts: 761
Default

Quote:
Originally Posted by DVT Mike View Post
I don't usually oil the brakes but it won't hurt. More importantly, clean the tabs and drum with alcohol to remove dust, oxidation etc. As Tavery suggests, service the stock bearings before committing to replacement.
If you don't oil them and you don't grease them, they will squeal.
pro reel is offline   Reply With Quote
Reply

Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer.


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2013 BassFishin.Com LLC