12-15-11, 10:04 PM | #1 |
BassFishin.Com Veteran Member
Join Date: Jun 2011
Posts: 849
|
Been awile, a novice question
hows it going, i am like a flip coin, been chasing cats, then bass then cats, now i am onto the winter bass. I got a gift for my b-day awile back and not sure if the pole is messed up or this is the way it is. i got the shimono voltaeus, 7'0 MH fast. When i look at the pole, it's straight in front of me, it looks as if the end is droping a bit. It doesn't have anything on it, jsut the pole. I have never had a fast tip before, is this how they are made.
|
12-15-11, 10:15 PM | #2 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
Part of it is probably the weight of the guides pulling it down a bit but mostly it's the blank being a bit curved. It's rare to get a blank that is perfectly straight, even on high dollar rods. I've heard that the very best blanks are sold as blanks to rod builders and the rest go to be made as production rods. Shimano doesn't sell blanks so that is neither here nor there really, just illustrates how common this is. It is very normal for blanks to be curved a little and is nothing to worry about, unless it is really bad. It doesn't have anything to do with the action.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
12-15-11, 11:23 PM | #3 |
BassFishin.Com Veteran Member
Join Date: Jun 2011
Posts: 849
|
alright thanx, know i just need to know what to do with it
|
12-16-11, 06:48 AM | #4 |
BassFishin.Com Super Veteran
|
If your referring to fixing it, you could break it and hope Shimano gives you another one. That is about all you could do.
If you are referring to fishing with it, sounds like a nice Tex-Rig rod.
__________________
\,,,,/ ROCK ON! HRN4L! |
12-16-11, 07:57 AM | #5 |
BassFishin.Com Premier Elite
Join Date: Jul 2006
Location: IN
Posts: 8,308
|
Well, you could send it to me around March and I'll try it out for ya just to make sure the rod is working properly.
__________________
Just one more cast, and then some! |
12-16-11, 08:47 AM | #6 |
BassFishin.Com Veteran Member
Join Date: Jun 2011
Posts: 849
|
Lol it's not that bad, just looks a bit differant than the others
|
12-16-11, 09:03 AM | #7 |
BassFishin.Com Super Veteran
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
|
Blanks are often not exactly straight,contain spline and a curve normally does not show much if mounted correctly and it isnt excessive.
I have one that did it real bad cure was to lean against the wall,in opposite direction for storage. Other wise store in like a rod rack with no weight against the rod,that will at times cause a temporary bend,depending upon what its constructed of. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|