02-01-09, 01:10 PM | #1 |
BassFishin.Com Super Veteran
|
Sigma Help
my shakespere sigma has been out under the dirt-floor shed in the off season..
I cant get the side off.. everything is loose but it seems attached up-top.. i took off 3 screws, star drag and bearing, spool adjustment (cant think of the name of it) and its bearing and it wont come off.. any help?
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
02-01-09, 04:12 PM | #2 |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Avoca, NY
Posts: 3,508
|
Look for a screw coming from the opposite diretion holding the plate on.Either near the front of the reel or under the side plate where the spool is located.Sometimes under the thumbar.Depress the thumbar down and look and sometimes there is a little screw there.Try not to bury them in under the dirt floor,its hard on them in the long run. P N J
|
02-01-09, 05:45 PM | #3 |
BassFishin.Com Super Veteran
|
i'm taking it apart on my back porch on the table.. inside.. i just store them next to the back door step on the dirt floor garage, or in the shed with a grass/dirt floor..
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
02-01-09, 06:25 PM | #4 |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Avoca, NY
Posts: 3,508
|
Let me know if you can't get it.I like to put a beach towel out on the table when tearing a reel down.It helps keep things from rolling around.Keep track of the 2 little springs on the pinion gear assembly.They are difficult to find if you lose track of them. P N J
|
02-01-09, 07:56 PM | #5 |
BassFishin.Com Super Veteran
|
yeah, theres no screw .. no place for a screw.... the spool and theres no room at the top past it.. theres nothing behind the little line winder thing either.. i tried to slide a screwdriver around it and it get to one point and it wont open anymore..
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
02-04-09, 03:40 PM | #6 |
BassFishin.Com Super Veteran
|
bump .....
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
02-04-09, 04:33 PM | #7 |
BassFishin.Com Super Veteran
Join Date: May 2006
Location: Accokeek MD
Posts: 3,315
|
Little clip under spool tension knob maybe?
Capt Mike
__________________
Capt Mike Starrett light tackle guide Potomac River http://www.indianheadcharters.com |
02-04-09, 04:46 PM | #8 |
BassFishin.Com Super Veteran
|
nope.. i got it out..
do yall see something i dont?
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
02-04-09, 05:00 PM | #9 |
BassFishin.Com Super Veteran
Join Date: Jul 2007
Posts: 1,134
|
Try to rotate the left side plate up, or down. My browning reel rotates mabye a 1/3 inch up then you can pull the left side plate off, remove the spool and behind the spool there is a screw you have to remove to get the right side plate off.
|
02-04-09, 05:04 PM | #10 |
BassFishin.Com Super Veteran
|
thanks doc..
it worked.. the spool comes out the left side.. and that side plate just comes off..
__________________
For Those I Love, I will Sacrifice: US Army since 2012 |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|