bass boat lids

molunkeringa · 09-14-06, 09:15 AM

looking to find someone who may know where i can get new lids to make my older bass boat have a tight flush deck like the new ones

bassbooger · 09-14-06, 01:22 PM

If you are just looking for the lids that go into holes like you see on bass boats, then you can get those at Bass Pro Shops or Cabela's either one. Just check them out on line.

zooker · 09-14-06, 05:04 PM

depends on the boat but yeah i have to go with booger..

zooker

molunkeringa · 09-15-06, 10:37 AM

no i have the original lids but they have a huge gap around them and the back deck I'm afraid somebody will wind up loosing theyre balance the boat is a 78 procraft so you know how the older boat decks were, i'm looking for a sleeker better functioning set up. has anyone heard of a deck type rubber thick stuff but hard enough to walk on?

bassbooger · 09-15-06, 10:55 AM

There was some of that rubber stuff on my boat when I bought it. I ended up taking it off and putting carpet down because it wasn't letting any moisture escape and my wooden floor was getting warped and I was afraid it was going to start rotting if I let it on.

Larry · 09-23-06, 08:19 PM

I just went thru this ordeal.. and I have a 86 king fisher.1 of the live well lia=d's was brockwn.. bass.. or cab.. or any place had the lids...I would go to some one that can do fab work..and have them make you what you need ,,.find some fab shop that does aluminum ask them to make them

09-14-06, 09:15 AM	#1
molunkeringa BassFishin.Com Member Join Date: Jan 2006 Location: savannah ga Posts: 7	bass boat lids looking to find someone who may know where i can get new lids to make my older bass boat have a tight flush deck like the new ones

09-14-06, 01:22 PM	#2
bassbooger BassFishin.Com Active Member Join Date: Jul 2004 Location: Dallas, NC Posts: 316	If you are just looking for the lids that go into holes like you see on bass boats, then you can get those at Bass Pro Shops or Cabela's either one. Just check them out on line. __________________ cast, reel, cast!!! Repeat if necessary!! Dallas, NC

09-14-06, 05:04 PM	#3
zooker BassFishin.Com Premier Elite Join Date: Jan 2004 Location: denton nc Posts: 13,441	depends on the boat but yeah i have to go with booger.. zooker __________________ the godfather.. aml in remission since 7-20-09

09-15-06, 10:55 AM	#5
bassbooger BassFishin.Com Active Member Join Date: Jul 2004 Location: Dallas, NC Posts: 316	There was some of that rubber stuff on my boat when I bought it. I ended up taking it off and putting carpet down because it wasn't letting any moisture escape and my wooden floor was getting warped and I was afraid it was going to start rotting if I let it on. __________________ cast, reel, cast!!! Repeat if necessary!! Dallas, NC

09-23-06, 08:19 PM	#6
Larry BassFishin.Com Member Join Date: Sep 2006 Location: Crosby-Texas Posts: 5	bass boat lids I just went thru this ordeal.. and I have a 86 king fisher.1 of the live well lia=d's was brockwn.. bass.. or cab.. or any place had the lids...I would go to some one that can do fab work..and have them make you what you need ,,.find some fab shop that does aluminum ask them to make them

09-15-06, 10:37 AM	#4
molunkeringa BassFishin.Com Member Join Date: Jan 2006 Location: savannah ga Posts: 7	no i have the original lids but they have a huge gap around them and the back deck I'm afraid somebody will wind up loosing theyre balance the boat is a 78 procraft so you know how the older boat decks were, i'm looking for a sleeker better functioning set up. has anyone heard of a deck type rubber thick stuff but hard enough to walk on?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)