Nanofil

gysgthard · 03-01-12, 09:07 PM

Want to let you all know that it is getting that time of year to look at your line and check to see if you need to re-spool some new line. Well I went out and bought Berkly's new Nanofil for two reasons First the name Nano is my nickname long story the other reason is it has Dyneema in it and that is used in a lot of protective armor. So I bought it it works great smooth casting no memory I recommend this line it will increase you distance and your arm will not tire as quick when you are butting in those long days of fishing . The only down fall is that it is not for bait casters only spinning reels.

carolina-rig-01 · 03-01-12, 09:37 PM

I am kinda curious as to why it's only for spinning reels? I can't see one good reason why you could only use a certain line on a spinning reel. I haven't used it but I have heard some reports on it and they have all said the same thing. Great casting line but horrible abrasion resistance. Have you had any problems with it getting chewed up easily?

gysgthard · 03-02-12, 08:24 AM

Carolina

I do not know why it is only for spining reels other then it is realy smooth as for the abrasion resistance I went do to the river and through the line there it was realy windy did not have any tangles in the line and had a jig on ran it throw rocks, trees and even got it hung up a couple of times and was abel to free it up and on the last hang up in some rocks the line broke but i was trying to brake it and I was realy pulling on it so as for your question YES it is and if I find out way only for spinning reels I will post that info.

joedog · 03-02-12, 09:45 AM

Quote:

Originally Posted by carolina-rig-01

I am kinda curious as to why it's only for spinning reels? I can't see one good reason why you could only use a certain line on a spinning reel. I haven't used it but I have heard some reports on it and they have all said the same thing. Great casting line but horrible abrasion resistance. Have you had any problems with it getting chewed up easily?

Berkley says,
The line diameters are so small the line diggs in on baitcasters, similar to low test braid.
Due to the manufacturing process the largest test they can make is 12lb., hence they can't make it a 'larger diameter'. 12lbs. the max.

gysgthard, what test you using?

gysgthard · 03-02-12, 10:09 AM

I am using 8# on both of my reels one for topwater popers and jeterbugs and the other for a texas rig also thanks for the info i email them also but have not heard back.

basshunter21 · 03-02-12, 10:31 AM

Heard it casts great, but sucks because it breaks a lot!

Who knows maybe itll work for ya man!

Bassboss · 03-02-12, 10:56 AM

My dad bought a spool a cabelas... looking forward to seeing how he likes it, I might take a few swings with it as well to see how I like it.

Glad you're enjoying it though!

Tavery5 · 03-02-12, 11:31 AM

I purchased a spool of the Nanofil in the 12lb test right after it was released. I spooled it on a Lews TP and used it for a day, I threw jigs and hollow bellied frogs on it. I did experience some dig in, both the spool and my finger. While it worked ok on the BC, I would not reccomend it for that application.

The line cast well, and I did not experience any problems with breaking or fraying, but I was not using it in an area that would have truely tested those properties of the iine.

WTL · 03-02-12, 11:33 AM

I think sometimes it takes a while for me to really gain confidence in a line. There are multiple attributes that a good line must have, and decent durability is one of the primary ones.

As a result of the time it takes to test line, i suppose I will just listen to you guys and let you be the gunea pigs. Meanwhile, I continue to use PP braid.

joedog · 03-02-12, 11:51 AM

Quote:

Originally Posted by gysgthard

I am using 8# on both of my reels one for topwater popers and jeterbugs and the other for a texas rig also thanks for the info i email them also but have not heard back.

Call me old fashioned but call them.
800-237-5539

carolina-rig-01 · 03-02-12, 12:47 PM

Quote:

Originally Posted by gysgthard

Carolina

I do not know why it is only for spining reels other then it is realy smooth as for the abrasion resistance I went do to the river and through the line there it was realy windy did not have any tangles in the line and had a jig on ran it throw rocks, trees and even got it hung up a couple of times and was abel to free it up and on the last hang up in some rocks the line broke but i was trying to brake it and I was realy pulling on it so as for your question YES it is and if I find out way only for spinning reels I will post that info.

Quote:

Originally Posted by Tavery5

I purchased a spool of the Nanofil in the 12lb test right after it was released. I spooled it on a Lews TP and used it for a day, I threw jigs and hollow bellied frogs on it. I did experience some dig in, both the spool and my finger. While it worked ok on the BC, I would not reccomend it for that application.

The line cast well, and I did not experience any problems with breaking or fraying, but I was not using it in an area that would have truely tested those properties of the iine.

Good information fellas. I wonder if using mono for backing would prevent it from digging in?

Tavery5 · 03-02-12, 12:56 PM

Quote:

Originally Posted by carolina-rig-01

Good information fellas. I wonder if using mono for backing would prevent it from digging in?

I did use either a mono or co-poly backing, the line is very thin and most of the dig in I had occured between the spool and the line.

Crankbait · 03-02-12, 01:17 PM

Quote:

Originally Posted by joedog

Berkley says,
The line diameters are so small the line diggs in on baitcasters, similar to low test braid.
Due to the manufacturing process the largest test they can make is 12lb., hence they can't make it a 'larger diameter'. 12lbs. the max.

gysgthard, what test you using?

I find this interesting because I use 6lb braid without the dig in problem of braid…….not sure if the roundness of Sufix Performance Braid and it’s roundness has anything to do with this…..

IowaBasser · 03-02-12, 05:09 PM

I have a new spool of 12 pound nanofil that I'm going to try this season (on a spinning reel.) From what I read abrasion isn't as much of a problem as knot-strength and/or knot-slippage. I'm also somewhat concerned about line visibility. I'm looking forward to getting out on the water and seeing how it performs!

carolina-rig-01 · 03-02-12, 05:20 PM

What are the characteristics of this line that make it benificial? Does it float? Sink? Have low stretch? I read that it's easy casting and improves casting distance but I haven't heard much beyond that.

OkobojiEagle · 03-03-12, 12:28 AM

This line has been out since last June... Google reviews or discussions about it. I've been using two spools of 10lb test since last June... I'll be using the same two spools of this line again this year.

oe

Tavery5 · 03-03-12, 12:44 AM

Quote:

Originally Posted by carolina-rig-01

What are the characteristics of this line that make it benificial? Does it float? Sink? Have low stretch? I read that it's easy casting and improves casting distance but I haven't heard much beyond that.

Zero Stretch, good sensitivity, no-memory, not a braid, not a mono, 12lb test nanofil is thinner than 6lb mono. Cast very well.

Jesse James · 03-03-12, 10:33 AM

I'm looking foward to trying some this year. What appeals to me is the zero memory. Sounds like a breeze to cast, and I figure with what I typically use spinning gear for - jerkbaits, flukes, etc. - the abrasion issues shouldn't be too much of a factor as I won't be pitching into heavy cover or dragging rocks or anything. Good discussion.
Jesse

gysgthard · 03-03-12, 12:18 PM

sorry not getting back so soon they say to use mon as a back filler and as fare as knot slippage the say to use a nanofil knot looks like a double palmer knot to me also thanks for all the extra info good fishing to all.

Team9nine · 03-05-12, 12:25 PM

Good stuff. Been throwing 4# and 6# since summer and once I got around the knot strength issue (use a fluoro/copoly leader for lighter weights), life has been good. Using it on spinning gear and have caught hundreds of bass on each and have not had the line break yet. Also doubles as a great crappie line if you like tossing tube jigs.

-T9

T7HeadTurner · 03-07-12, 03:00 PM

Dont waste your money..... My self had two break offs, tied the knot the way they said to. Also heard of a couple people have the same issue.
To have to tie on a leader is just plan stupid, should work rite down to the knot. It did cast nice, but Heck, Way better lines for half the price out there. McCoy

WatterBoy · 04-02-12, 08:47 AM

Quote:

Originally Posted by T7HeadTurner

Dont waste your money..... My self had two break offs, tied the knot the way they said to. Also heard of a couple people have the same issue.
To have to tie on a leader is just plan stupid, should work rite down to the knot. It did cast nice, but Heck, Way better lines for half the price out there. McCoy

x2. I was using 8lb test and had two worm bites total this past weekend and the line broke on the hookset both times, and these weren't eye-crossing hooksets, just normal ones. I did catch a 4.2 LM with this line while using a Pop-R, but I've seen enough. Even though this line gives WAY more casting distance than any other line I've ever used, I doubt I'll be trying it again any time soon. I'm not an expert, but to me it looked like the line was breaking above the knot somewhere, not the knot itself. I plan to peel it all off and go back to my tried and true InvisX.

basenjib123 · 04-08-12, 07:15 AM

I have tried it on a baitcaster and it seems to cast fine for me. I really don't use it per say right at the moment so I dont know about its durability etc.

gysgthard · 04-08-12, 09:36 PM

Well went out this weekend to try out my Nanofil line with some jerk baits LOVE IT did not break hook sets were great. the one thing I did do only one time is I did not wet the line when tieing on a different jerk bait juat to see if it woul break and it did not. cought fish and it did not break Idid not take any pictures becouse the fish were not that big any where from 11"-13" did let them pull on the line and had some jump out of the water.

WatterBoy · 04-08-12, 09:45 PM

Quote:

Originally Posted by gysgthard

Well went out this weekend to try out my Nanofil line with some jerk baits LOVE IT did not break hook sets were great. the one thing I did do only one time is I did not wet the line when tieing on a different jerk bait juat to see if it woul break and it did not. cought fish and it did not break Idid not take any pictures becouse the fish were not that big any where from 11"-13" did let them pull on the line and had some jump out of the water.

Try something where they have the whole lure and some of the line in their mouth when you set the hook and see what happens.

03-01-12, 09:07 PM	#1
gysgthard BassFishin.Com Member Join Date: Jun 2011 Location: Elkhart, IN Posts: 63	Nanofil Want to let you all know that it is getting that time of year to look at your line and check to see if you need to re-spool some new line. Well I went out and bought Berkly's new Nanofil for two reasons First the name Nano is my nickname long story the other reason is it has Dyneema in it and that is used in a lot of protective armor. So I bought it it works great smooth casting no memory I recommend this line it will increase you distance and your arm will not tire as quick when you are butting in those long days of fishing . The only down fall is that it is not for bait casters only spinning reels.

03-01-12, 09:37 PM	#2
carolina-rig-01 BassFishin.Com Premier Elite Join Date: Feb 2006 Location: Webb City, MO Posts: 6,387	I am kinda curious as to why it's only for spinning reels? I can't see one good reason why you could only use a certain line on a spinning reel. I haven't used it but I have heard some reports on it and they have all said the same thing. Great casting line but horrible abrasion resistance. Have you had any problems with it getting chewed up easily? __________________ You only live once. But if you do it right, once is enough.

03-02-12, 10:56 AM	#7
Bassboss BassFishin.Com Premier Elite Join Date: Jan 2009 Location: Shawano, WI Posts: 7,761	My dad bought a spool a cabelas... looking forward to seeing how he likes it, I might take a few swings with it as well to see how I like it. Glad you're enjoying it though! __________________ If you can't fix it with heavy squats or fish oil, you're probably going to die.

03-02-12, 11:31 AM	#8
Tavery5 BassFishin.Com Super Veteran Join Date: Dec 2009 Location: Wichita, KS Posts: 2,427	I purchased a spool of the Nanofil in the 12lb test right after it was released. I spooled it on a Lews TP and used it for a day, I threw jigs and hollow bellied frogs on it. I did experience some dig in, both the spool and my finger. While it worked ok on the BC, I would not reccomend it for that application. The line cast well, and I did not experience any problems with breaking or fraying, but I was not using it in an area that would have truely tested those properties of the iine. __________________ They call me Ishmael

03-02-12, 11:33 AM	#9
WTL BassFishin.Com Premier Elite Join Date: Dec 2001 Location: Huntsville, Al Posts: 7,466	I think sometimes it takes a while for me to really gain confidence in a line. There are multiple attributes that a good line must have, and decent durability is one of the primary ones. As a result of the time it takes to test line, i suppose I will just listen to you guys and let you be the gunea pigs. Meanwhile, I continue to use PP braid. __________________ Selling live waterdogs for less since 2005.

03-02-12, 08:24 AM	#3
gysgthard BassFishin.Com Member Join Date: Jun 2011 Location: Elkhart, IN Posts: 63	Carolina I do not know why it is only for spining reels other then it is realy smooth as for the abrasion resistance I went do to the river and through the line there it was realy windy did not have any tangles in the line and had a jig on ran it throw rocks, trees and even got it hung up a couple of times and was abel to free it up and on the last hang up in some rocks the line broke but i was trying to brake it and I was realy pulling on it so as for your question YES it is and if I find out way only for spinning reels I will post that info.

03-02-12, 10:09 AM	#5
gysgthard BassFishin.Com Member Join Date: Jun 2011 Location: Elkhart, IN Posts: 63	I am using 8# on both of my reels one for topwater popers and jeterbugs and the other for a texas rig also thanks for the info i email them also but have not heard back.

03-02-12, 10:31 AM	#6
basshunter21 BassFishin.Com Active Member Join Date: Jul 2010 Location: Erie, Pa Posts: 266	Heard it casts great, but sucks because it breaks a lot! Who knows maybe itll work for ya man!

03-02-12, 05:09 PM	#14
IowaBasser BassFishin.Com Active Member Join Date: Sep 2010 Location: Ames, Iowa Posts: 360	I have a new spool of 12 pound nanofil that I'm going to try this season (on a spinning reel.) From what I read abrasion isn't as much of a problem as knot-strength and/or knot-slippage. I'm also somewhat concerned about line visibility. I'm looking forward to getting out on the water and seeing how it performs!

03-02-12, 05:20 PM	#15
carolina-rig-01 BassFishin.Com Premier Elite Join Date: Feb 2006 Location: Webb City, MO Posts: 6,387	What are the characteristics of this line that make it benificial? Does it float? Sink? Have low stretch? I read that it's easy casting and improves casting distance but I haven't heard much beyond that. __________________ You only live once. But if you do it right, once is enough.

03-03-12, 12:28 AM	#16
OkobojiEagle BassFishin.Com Active Member Join Date: Mar 2011 Location: NW Iowa Posts: 270	This line has been out since last June... Google reviews or discussions about it. I've been using two spools of 10lb test since last June... I'll be using the same two spools of this line again this year. oe

03-03-12, 10:33 AM	#18
Jesse James BassFishin.Com Member Join Date: Nov 2011 Location: Cimarron, KS Posts: 40	I'm looking foward to trying some this year. What appeals to me is the zero memory. Sounds like a breeze to cast, and I figure with what I typically use spinning gear for - jerkbaits, flukes, etc. - the abrasion issues shouldn't be too much of a factor as I won't be pitching into heavy cover or dragging rocks or anything. Good discussion. Jesse

03-03-12, 12:18 PM	#19
gysgthard BassFishin.Com Member Join Date: Jun 2011 Location: Elkhart, IN Posts: 63	sorry not getting back so soon they say to use mon as a back filler and as fare as knot slippage the say to use a nanofil knot looks like a double palmer knot to me also thanks for all the extra info good fishing to all.

03-05-12, 12:25 PM	#20
Team9nine BassFishin.Com Member Join Date: Jun 2009 Posts: 4	Good stuff. Been throwing 4# and 6# since summer and once I got around the knot strength issue (use a fluoro/copoly leader for lighter weights), life has been good. Using it on spinning gear and have caught hundreds of bass on each and have not had the line break yet. Also doubles as a great crappie line if you like tossing tube jigs. -T9

03-07-12, 03:00 PM	#21
T7HeadTurner BassFishin.Com Active Member Join Date: Mar 2012 Location: CA, Delta Posts: 110	Dont waste your money..... My self had two break offs, tied the knot the way they said to. Also heard of a couple people have the same issue. To have to tie on a leader is just plan stupid, should work rite down to the knot. It did cast nice, but Heck, Way better lines for half the price out there. McCoy __________________ "Turnin' Frogs Into Toads"

04-08-12, 07:15 AM	#23
basenjib123 BassFishin.Com Member Join Date: Apr 2012 Posts: 2	I have tried it on a baitcaster and it seems to cast fine for me. I really don't use it per say right at the moment so I dont know about its durability etc.

04-08-12, 09:36 PM	#24
gysgthard BassFishin.Com Member Join Date: Jun 2011 Location: Elkhart, IN Posts: 63	Well went out this weekend to try out my Nanofil line with some jerk baits LOVE IT did not break hook sets were great. the one thing I did do only one time is I did not wet the line when tieing on a different jerk bait juat to see if it woul break and it did not. cought fish and it did not break Idid not take any pictures becouse the fish were not that big any where from 11"-13" did let them pull on the line and had some jump out of the water.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)