pnj question..

zooker · 03-25-07, 11:58 AM

i have been beating the 1/4oz pnj fairly quite a bit. i am having a problem keeping the fiber weed guard on the bait. i cut the weed guard but do not remove any. i have about 8 jigs with out weed guards. is this normal?? where can i find replacement weed guards?? what glue would you use to install them..
this fish knocked the weed guard off the bait..

zooker

dampeoples · 03-25-07, 02:24 PM

PM your addy again, and i'll send some to you, or you can get 100 from one of the suppliers for around $6.00

bassfanpa · 03-25-07, 10:14 PM

You can buy more from Jann's, Barlows, or Stamina. If they are coming out that frequently, something is wrong. Are they all the same brand? If so, and it is one you like, I suggest a bit of epoxy around the weedguard before you fish it. I make my own jigs and don't have that problem. After I paint them I epoxy in place, and then coat the whole jig in epoxy...never had one come out. Or try Superglue Gel...works wonders on just about anything that is loose in my boat.

mymomisbecky · 03-25-07, 11:39 PM

bassfanpa is right on the money. epoxy or superglue gel. I dont seem to have a problem with my weedguards coming out this way.

links_man2 · 03-26-07, 08:51 AM

I would try another brand of jig, I have never had this problem.

lizardsrule · 03-26-07, 08:16 PM

Nice color of jig, and that bass looks like a albino LOL. No suggestions on the weedguard, the bait makers know more than me, I'd just buy new ones.

Lizards

FAQ
Members List
Social Groups	Members List	Search	Today's Posts	Mark Forums Read

03-25-07, 11:58 AM	#1
zooker BassFishin.Com Premier Elite Join Date: Jan 2004 Location: denton nc Posts: 13,441	pnj question.. i have been beating the 1/4oz pnj fairly quite a bit. i am having a problem keeping the fiber weed guard on the bait. i cut the weed guard but do not remove any. i have about 8 jigs with out weed guards. is this normal?? where can i find replacement weed guards?? what glue would you use to install them.. this fish knocked the weed guard off the bait.. zooker __________________ the godfather.. aml in remission since 7-20-09

03-25-07, 02:24 PM	#2
dampeoples BassFishin.Com Veteran Member Join Date: Jul 2006 Location: Raleigh, NC Posts: 826	PM your addy again, and i'll send some to you, or you can get 100 from one of the suppliers for around $6.00 __________________ The Jon Boat Fishing Club and Fishing with Sterling Peoples

03-26-07, 08:16 PM	#6
lizardsrule BassFishin.Com Premier Elite Join Date: Sep 2003 Location: Saint Augustine, FL Posts: 7,374	Nice color of jig, and that bass looks like a albino LOL. No suggestions on the weedguard, the bait makers know more than me, I'd just buy new ones. Lizards __________________ There are three types of Snakes I hate 1. Live Snakes 2. Dead Snakes 3. Sticks that look like Snakes. And Gators too!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-25-07, 10:14 PM	#3
bassfanpa BassFishin.Com Member Join Date: Jan 2007 Posts: 15	You can buy more from Jann's, Barlows, or Stamina. If they are coming out that frequently, something is wrong. Are they all the same brand? If so, and it is one you like, I suggest a bit of epoxy around the weedguard before you fish it. I make my own jigs and don't have that problem. After I paint them I epoxy in place, and then coat the whole jig in epoxy...never had one come out. Or try Superglue Gel...works wonders on just about anything that is loose in my boat.

03-25-07, 11:39 PM	#4
mymomisbecky BassFishin.Com Active Member Join Date: Jun 2006 Location: Des MOines, IA Posts: 336	bassfanpa is right on the money. epoxy or superglue gel. I dont seem to have a problem with my weedguards coming out this way.

03-26-07, 08:51 AM	#5
links_man2 BassFishin.Com Active Member Join Date: Oct 2006 Location: Sanford, NC Posts: 134	I would try another brand of jig, I have never had this problem.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)