Skeeter will not shut off

[bassun]

Hello - I appologize if this has been answered else where, if so I didn't find it.
I have a 1999 Skeeter 90SS (Yamaha 90). I did not manage to get on the water ANY last year (whole different complaint lol) but this spring, I hooked up the water hose, and fired up the engine. After a little sputtering etc, she fired and ran fine. And ran ... and ran... and ran. I turned off the key...it ran. I pulled the kill switch...it ran. Finally to kill it, I opened the manual choke and it smothered itself.

I researched and found that often times the culprit is a loose wire( I think I read a black and white one), and i do infact have a loose wire...but I have no idea where it goes (and it isn't black and white - it's black). Below the ignition switch there is the harness, there is a black wire running out of the harness but isnt attached to the ignition switch, or the kill switch. But, I do not see anywhere where it "appears" to have been attached. It does not have any connector on it, and there are no connectors missing their leads. SO -- the question is two fold... A) If this needs to be connected, any ideas to what / where? I couldn't find any diagrams of the harness online or at skeeter.com... B) If this is not really the problem, what the heck is?

Any thoughts or suggestions greatly appreciated!