12-27-10, 09:27 PM | #1 |
BassFishin.Com Super Veteran
Join Date: Feb 2005
Location: Bellevue, Ohio
Posts: 2,338
|
Rod Differences By The Same Manufacturer
I have been buying quite a few new rods the past few months... and they have all been Quantum.
I noticed that several rods of the same power and action have different tip actions (some have softer tips than others). One of the rods I have purchased was the new 7' MH Fast Quantum Energy PT. This is the new version of the energy rod, with an ACS seat and the Pac. Bay HiAloy Guides. The rod is epoxied all the way up the blank to the tip. I purchased another new KVD Signature Series (the new models, with ACS seat, Pac. Bay HiAloy Guides and Tour Edition Blank). This rod is not epoxied up the blank or anywhere for that matter (except for the wraps). The Energy rod has a tip that is quite a bit stiffer than the KVD Sig. Series. With a reel (BPS Pro Qualifier Tournament - 7.1 oz.) on the rod , the Energy feels tip heavy, while the KVD Sig. Series feels really balanced. The balance point on the rods is about 3 inches off from one rod to the other. I have noticed the same thing with my Tour KVD Crankbait Rods (which have epoxy all the way up the blank). When comparing them to the same Eglass KVD Sig. Series Crankbait rod of the same action, the rod w/o epoxy is better balanced by about 2.5 or 3 inches. The rods are both 7' M Moderate but the Tour KVD w/ epoxy is stiffer in the tip than the KVD Sig. Series w/o the epoxy. So on to my question: Will having epoxy all the way up the rod blank make it a more stiff rod, versus a rod from the same manufacturer that doesn't have the epoxy? And will having the epoxy on the blank make the rod feel more tip heavy than a rod w/o the epoxy? Ryan
__________________
Never Give Up! |
12-27-10, 11:05 PM | #2 |
BassFishin.Com Super Veteran
Join Date: Jun 2006
Location: Southern , IN
Posts: 1,832
|
I cant figure you out. Do you own a BPS store , or just working on it ? Do you have stock in BPS ? Do you at least work for BPS ?
|
12-28-10, 08:39 AM | #3 | |
BassFishin.Com Super Veteran
Join Date: Feb 2005
Location: Bellevue, Ohio
Posts: 2,338
|
Quote:
I am just trying to find the perfect set of rods that will perform at the top level of performance on the water. Elimante all the variables that you can on the water and I feel you will put more fish in the boat. Ryan
__________________
Never Give Up! |
|
12-28-10, 10:52 AM | #4 |
BassFishin.Com Active Member
Join Date: Jul 2010
Location: Sacramento, California
Posts: 483
|
Then stop putzin around real simple
4 Pro Qualifer reels, if I was not such a Pflueger Trion fan,thats the only other BC I really like these days put em on 4 matching 7 ft MedHeavy BC rods and your in NO VARIBLES<SAME RIG EVERY CAST unless you are throwing swim baits, then I have no ionput,not my deal I throw jigs,c rigs,trigs,trik sticks, wacky rigs, brush hogs,frog,jitterbugs,storm pre rigs and cranks with 4 set ups, except all mine have old school Pflueger Trion NSLP's on them and are 6'6", and MH/Fast I do have one Med/Fast spinning rig for 3 inch wacky stiks and smaller tubes when fishing for smallies in the rivers here no variables same rig every time its in your hand Last edited by Ebbetsguy; 12-28-10 at 10:59 AM. |
12-28-10, 10:56 AM | #5 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
I'm not totally familiar with all these rods. I know what they look like but that's about it. I can tell you that they aren't epoxied all the way down the blank. It is a gloss finish but not epoxy. The gloss finish shouldn't be any different than any other coat of finish, It shouldn't have any effect on the action or balance of the rod.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L Last edited by Jrob78; 12-28-10 at 11:46 AM. |
12-28-10, 11:04 AM | #6 |
BassFishin.Com Active Member
Join Date: Jul 2010
Location: Sacramento, California
Posts: 483
|
Hey Jrob, I think, depending on how many coats and thickness of coats it can affect both action and weight of the rod, there are some experienced rod builders here, I wonder if that's true. Thats just an opinion and I have no way of knowing if thats true
|
12-28-10, 11:35 AM | #7 |
BassFishin.Com Super Veteran
Join Date: Jul 2009
Location: Dallas,TX (DFW)
Posts: 2,212
|
Yea its just a clear gloss urethane finish,like Joe said...It really shouldn't affect anything.
Any weight added wont change the action of the rod but it can slow the response.In return,you'll get a softer rod that may even be less efficent.But this is referring to adding too many guides,longer guides wraps with too much thread finish,etc....and not a clear finish. But even adding several coats of a urethane finish probably wont change enough for you to ever notice... Balancing is just from the construction of the rod,versus the components used...Has nothing to do with the rod itself. All blanks act and respond differently.....Im also not familiar with the rods,Did one have more guides than the other?...You said one is a E glass,is the other S glass?...S glass is typically stiffer due to the higher modulus rating,if I remember right?
__________________
[nelsoncustomrods.com] |
12-28-10, 11:45 AM | #8 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
You are correct, S glass is generally lighter and faster than E glass, due to the higher modulus.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
12-28-10, 12:25 PM | #9 |
BassFishin.Com Super Veteran
Join Date: Feb 2005
Location: Bellevue, Ohio
Posts: 2,338
|
The rods have the same size guides and are the same guide composition as well.
As for the cranking rods, they are both a composite of graphite and E Glass, and both have 10 guides.... the Tour Rod is Fuji Hardloy, while the Sig. Series are Pac. Bay HiAloys. I was just wanting to get a little insight on the difference in the differnet tip actions among the rods. Ryan
__________________
Never Give Up! |
12-28-10, 01:16 PM | #10 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
The different blanks are probably made on different mandrels making the tapers different. The glass and graphite can also be layered differently, this will effect the tip as well.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
12-28-10, 04:40 PM | #11 | |
BassFishin.Com Super Veteran
Join Date: Jun 2006
Location: Southern , IN
Posts: 1,832
|
Quote:
|
|
12-28-10, 10:38 PM | #12 |
BassFishin.Com Super Veteran
Join Date: Feb 2005
Location: Bellevue, Ohio
Posts: 2,338
|
Ok, thanks for all the info guys. It was not really a big deal, but it was something that I wanted to learn some more about. Thanks,
Ryan
__________________
Never Give Up! |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|