10-24-09, 10:11 AM | #1 |
BassFishin.Com Super Veteran
Join Date: Jul 2008
Location: Central NY - Finger Lakes
Posts: 1,307
|
First casting rod 'n reel
Okay, always used open faced spinning gear except that time in my youth when I tried fly fishing mostly for "tree fish". As a youngster, I well remember my dad with his old school bait caster and him cussing every 3rd cast or so that backlashed - lol (In the olden days, I don't think they had the casting adjustments and counterweights like modern reels so if your thumb wasn't really smart relative to the toss, there'd be a mess).
I decided on an inexpensive Shakespeare rod and reel to dip my toe in the water without getting too crazy. I put some 14lb Stren sonic braid on it. I think I'll play some on the lawn before getting to the water.
__________________
Fish now, work later |
10-24-09, 03:01 PM | #2 |
BassFishin.Com Veteran Member
Join Date: Sep 2009
Location: Prattville, Alabama
Posts: 801
|
Good Luck. Tighten everything down to start with and adjust as you get more comfortable. Always check your adjustments before starting to fish.
|
10-24-09, 05:53 PM | #3 |
BassFishin.Com Premier Elite
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
|
Boy are you screwed, Abbey. By this time next year, the bait monkey will have made you buy about 6 more baticasters. Take it from a guy who grudgingly switched this year, and is now a 100% believer.
__________________
Many men go fishing all of their lives without knowing it is not fish they are after. |
10-24-09, 07:48 PM | #4 |
BassFishin.Com Super Veteran
Join Date: Feb 2006
Location: Parkesburg, Pa.
Posts: 3,762
|
SIX? Noway he'll get away with ONLY 6. More like 10 or 12, TO START WITH. I can hear the Monkey howling with laughter now. Because we all know - for every new reel, he'll NEED A NEW ROD. Doomed, the man is doomed.
|
10-24-09, 09:51 PM | #5 |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
Doomed is right!
Congrats on the new combo. Keep at it and you'll get good though!
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
10-24-09, 11:42 PM | #6 |
BassFishin.Com Super Veteran
Join Date: Jul 2008
Location: Central NY - Finger Lakes
Posts: 1,307
|
Well I took it out in the yard and made several casts. I quickly realized that the release has to be much different than I'm used to lest the bait goes way left (Need to release much sooner than with spinning gear). Sidearm works best as an overhead cast seemed to plummet into the ground not far ahead of me. I sortof got the hang of it but confess that I can get twice as much distance from my spinning rigs. On the up side, backlashes when they happened were very minor.
So using the instructions I decided to try and adjust the centrifugal brake weights but these were just flimsy plastic pieces that would pop off easily (nearly lost one). Not too impressed. The only saving grace is that with the boat, typically, I don't need to cast a country mile (like from shore) and I suppose I'll get more distance with practice.
__________________
Fish now, work later |
10-25-09, 08:57 AM | #7 |
BassFishin.Com Premier Elite
|
I think you'll have the same problems with most centrifugal brakes now days. They all, with the exception of the Pflueger and BPS's, feel very cheap to me, including my Shimano Citica and AbuG Revo.
Hang in there, and you'll definately get the hang of it. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
10-27-09, 01:07 PM | #8 |
BassFishin.Com Super Veteran
Join Date: Jul 2008
Location: Central NY - Finger Lakes
Posts: 1,307
|
I dunno about 'you all', but I can get much more distance outta my spinning rigs than this casting rig....especially if I try to throw a light Jig. I'll be okay baitcasting in/from the boat, but I'm not gonna be leaving the spinning tackle home anytime soon.
__________________
Fish now, work later |
10-27-09, 01:25 PM | #9 |
BassFishin.Com Premier Elite
|
When I first started baitcasting, I definately got more distance with my spinning reels.
As you get better and turn the brakes and spool tension down, you'll be getting much more distance than you are now, maybe even more than with a spinning reel. If nothing else, I think baitcasters are more versatile. While you'll probably always be able to get more distance with lighter lures (1/8 oz and less), you will probably be able to throw bigger lures better with a BC. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
10-27-09, 02:38 PM | #10 |
BassFishin.Com Premier Elite
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
|
Agree with BB144.
Something to add. You have to compare apples to apples too. I have found that most people's spinning rods are less stiff than their baitcasting rods. I'm sure this has something to do with most people using baitcasters for the heavy gruntwork, while using spinning tackle for light finesse work. So there's somewhat of a self-fulfilling premise going on here. The point is, a medium-light or medium spinning rod with a moderate action is going to load up much better with a light bait than a medium or broomstick-like medium-heavy baitcasting rod with fast or extra-fast tips. I've been looking at drop shot rods (spinning) for next year, and have been amused at how much more flimsy and springy they seem than my other rods.
__________________
Many men go fishing all of their lives without knowing it is not fish they are after. |
10-27-09, 03:06 PM | #11 |
BassFishin.Com Super Veteran
Join Date: Jun 2009
Location: Bellevue, Ohio
Posts: 1,398
|
good luck man
__________________
Tom |
10-27-09, 03:55 PM | #12 |
BassFishin.Com Member
Join Date: Aug 2009
Location: Charlton, New York
Posts: 92
|
Practice practice practice!! Once you get the hang of adjusting the reel you will have a setup for each different lure that you throw. Bow now the the monkey your DONE!! I used to use just open face reel's. I had a about ten of them now I only own 2 and now have 12 baitcasters. Took a whole winter of throwing it in the snow to get used to them. THEN you move on to pitching and flipping in a bucket. It get's addicting especially once the bucket turns into a shot glass.
|
10-27-09, 04:09 PM | #13 | |
BassFishin.Com Super Veteran
Join Date: Jul 2008
Location: Central NY - Finger Lakes
Posts: 1,307
|
Quote:
I pulled the reel apart to adjust the brake only to find four little plastic tabs barely hanging on to little spokes. The lock/unlock indicated in the instructions that came with the reel are a bit of a joke. I tried to move one of the tiny plastic pieces and it popped off - lucky I was able to find it and put it back on with needle nose pliers that required the dexrous skill of a brain surgeon - (in the boat it's likely this little piece of ...'technology' would have been gone). Anyway, short of taking them off, these don't really lock/unlock to adjust in any way I can see.....jeez. I was at least able to make a casting adjustment relative to the weight of the bait to allow the reel to spin (when casting).
__________________
Fish now, work later |
|
10-27-09, 04:33 PM | #14 | |
BassFishin.Com Super Veteran
Join Date: May 2007
Location: Ridgeland MS
Posts: 3,923
|
Quote:
This should look something like your reel. Obviously, this reel has 6 brakes vs. your 4. When you cast with the little plastic caps/grommets/doo-hickeys pushed out to the end, the centrifugal force of the spool forces them against the inside of the body of the reel, slowing the spool down. If they're pushed in, they don't touch anything, so the spool spins more freely. Be sure to keep your brakes balanced...don't turn 1 on, 3 off, or whatever. Your reel, having 4 brakes, can either have all on, all off, or two on two off. With a 6 spoke setup, you could turn 3 on 3 off, 2 on 4 off, etc...as long as it's symmetrical to the axis of rotation, you're good.
__________________
I smell smoke, and I hear sirens. Do you think that's a problem? |
|
10-27-09, 04:33 PM | #15 |
BassFishin.Com Premier Elite
|
I think your problem with the brakes may be the cheaper reel. Like I said before, they all feel cheap, even on a $280 reel, but I've never had one come off of either of my reels with centrifugal brakes. I still find I like the performance of magnetic brakes better.
Here's a couple pics that I have. you can see what I mean by the brakes on the BPS and high end Pfluegers being built better. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
10-27-09, 05:13 PM | #16 |
BassFishin.Com Super Veteran
Join Date: Jul 2009
Location: Dallas,TX (DFW)
Posts: 2,212
|
Doesnt centrifugal braking brake more of the beginning of the cast and magnetic braking brake more at the end of a cast?
__________________
[nelsoncustomrods.com] |
10-27-09, 05:41 PM | #17 | |
BassFishin.Com Premier Elite
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
|
Quote:
The magnetic brakes have a smaller effect than centrifugal, but affect it the whole time. So they have the most effect during slow parts of the cast, when the centrifugal brakes haven't kicked in, notably the end, or when doing short range pitching.
__________________
Many men go fishing all of their lives without knowing it is not fish they are after. |
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|