06-16-10, 10:16 AM | #1 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
Fluorocarbon
I've used various fluorocarbon lines in the past with mediocre results. I use P-Line CX on the majority of my reels now. I am about to finish up a dedicated Senko/Fluke rod and want to use fluoro. My plan is to try out Seaguar InvizX, mainly for its manageability.
A sensitive, low stretch line that sinks and has low memory is what I'm looking for. I realize that there isn't any one line that will have all those characteristics. The InvizX has very high stretch, that's the trade off for the low memory. I am open to suggestions, what fluoro do you guys like? Last edited by Jrob78; 06-16-10 at 10:23 AM. |
06-16-10, 11:48 AM | #2 |
BassFishin.Com Veteran Member
Join Date: Jan 2010
Location: Superior, NE
Posts: 974
|
I really dislike most fluoro lines (actually, if I had a better choice I wouldn't use them at all).
But, this has my interest. A sinking braid! I'm thinking about picking some up for smallie fishing around here, as the water is not ultra clear (although I'm still not convinced I've ever found line shy fish anywhere). http://www.berkley-fishing.com/prod....=266072&u=GTQS I've also been looking at this: http://www.hottackle.com/product_inf...oducts_id=5224 |
06-16-10, 12:10 PM | #3 |
BassFishin.Com Active Member
|
I bought some Cabela's Fluro and used it for the first time last Friday. 15lb test on a couple baitcaster worming setups. It cast good and is much cheaper than other fluros. Someone hinted that it is made by Seagure. I use the InvizX 8 lb test for my leader on Drop shot and Shaky head rigs. I really like the InvizX line too. I'll stick to it for the small line and the Cabela's on larger stuff.
__________________
2015 Triton 18 TRX, Evinrude 200HP |
06-16-10, 12:30 PM | #4 | |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
Quote:
|
|
06-16-10, 01:04 PM | #5 |
BassFishin.Com Active Member
Join Date: Aug 2009
Location: Jamestown, OH
Posts: 310
|
I use a little bit of everything. I really like BPS Fluorocarbon lines. Very little stretch and in my opinion is very manageable. Another brand I've tried out and really like so far is the Spiderwire 100% fluorocarbon. I think it's at about the same price point as the BPS and Seaguar. Although, if you want the best available, you could always pay $50 for a spool of Tatsu. It's expensive, but apparently it's the greatest thing since sliced bread.
__________________
"If you become a jack of all bass fishing trades but a master of none, you're setting yourself up for mediocrity." - Denny Brauer |
06-16-10, 01:48 PM | #6 |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
IMO BPS line is very good! It's mix of all of them it does not sacrifice one for the other, it pretty much buts everything half way! So you get a line that has good sensitivity, good manageability, little stretch (this is coming from a guy that is VERY picky about the amount of stretch a line has), and great abrasion resistants. I have not used InvizX or AbrazX, but if it's going on a bait cast, I say get AbrazX. I hear it does not not have much memory, and is still a sensitive line.
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
06-16-10, 01:57 PM | #7 |
BassFishin.Com Super Veteran
Join Date: Apr 2005
Location: WA State
Posts: 1,783
|
I'd stick with Invizx. This "stretchiness" does not affect its ability to transmit feedback to your hands nor the hook set. On the contrary, I think it saves more hook sets, especially if you're dealing with finesse and crank baits. You also get managability and limpness, which is a plus for spinning reels. Other fluoros practically jump off of the spool for spinning reels. This is not an issue for casting rods.
The other thing for me for Invizx is that my local shops carry it for less than $15 so that is even more incentive.
__________________
ARX "If people concentrated on the really important things in life, there'd be a shortage of fishing poles." Doug Larson (Shimano 2005 Reel Catalog) |
06-16-10, 02:07 PM | #8 |
BassFishin.Com Premier Elite
|
Another vote for InvisX.
I haven't noticed too much stretch, and it still provides good hooksets for Senkos and t-rigs. InvisX had good sensitivity, and isn't too pricey compared to some other fluoros. Since I haven't tried AbrasX, InvisX is my choice when I use fluorocarbon. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
06-16-10, 02:07 PM | #9 |
Administrator
Join Date: Jul 2005
Posts: 651
|
Just a quick note to everyone... As many of you know, I like both BPS XPS Fluoro and Seaguar's fluorocarbon lines.
I have always been a big fan of both Seaguar AbrazX and InvizX. However, recently, I've had tremendous breaking problems with AbrazX. Usually I buy all my spools in 1000 or 3000 yd bulk spools. With these bigger spools, I haven't had a problem. However, I've been fishing out-of-state a lot these past couple weeks and travel with lots of 200 yd AbrazX and InvizX spools. At least a couple of the 200 yd AbrazX spools I recently purchased seem to be defective. These defective spools have counted for about 7-8 break-offs in just the past 2 weeks. The line is breaking under "less-than-extreme" resistance and also splintering apart when 'bow-snapping' snags and such. I have used AbrazX for quite awhile with good success, however, I seemed to be plagued recently with defective spools. I have a feeling something might be going awry at factory. I haven't spoken to Seaguar about my recent defective spools.. but may in the near future. I'll be interested in purchasing a few more spools to see if I just happened to get very unlucky with the few 200 yd spools I had recently purchased. I have not had any problems with my bulk spools. I also have had no problems with InvizX, and am now recommending that line (InvizX) until I figure out why all these 200 yd spools I'm getting are seemingly defective. Bass Pro's XPS Fluorocarbon is a great line (especially when on sale) and seems to be very consistent and reliable. Just thought I'd share my recent experiences. |
06-16-10, 02:11 PM | #10 |
BassFishin.Com Premier Elite
|
Interesting about the AbrasX Kevin. It could have possibly been bad batch or something, it does happen occasionally.
BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
06-16-10, 04:58 PM | #11 |
BassFishin.Com Active Member
Join Date: Oct 2007
Posts: 490
|
Ditto. I have quit using them. I rarely fish clear water though. Too much memory. Too expensive. If you bend the line or get the least little backlash it may and probably will break at that spot. No more fluoro for me until they improve it.
|
06-16-10, 05:10 PM | #12 |
BassFishin.Com Super Veteran
Join Date: Apr 2010
Location: Louisville, KY
Posts: 1,119
|
My buddy fishes tourneys, and he uses nothing but 15lb Big Game... when i asked him about flouro... he simply stated that he catches as much as teh next guy paying 3 times as much for line.... so why switch... i just decided i didnt like spending that much...
|
06-16-10, 05:17 PM | #13 |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
Kevin that is interesting about the Abrazx. I have been using it since it came out and never had any problems, but I have been using the bigger bulk spools like you mentioned. If you find anything out about why it is breaking I would appreciate it if you would let me know because I sure don't need to have this problem.
I have used BPS Flouro and found it to be very stiff and retain a lot of line memory, so I swore it off and went to Seaguar and haven't looked back since. It's pretty pricey but I think that Sunline makes a great flouro line, you might want to check it out too.
__________________
You only live once. But if you do it right, once is enough. |
06-16-10, 06:43 PM | #14 |
BassFishin.Com Super Veteran
Join Date: Apr 2008
Location: Thomaston CT
Posts: 3,862
|
I have switched completely over to Invizx , I was using triline 100% fluoro cor a while but went back to seaguar it's hard to beat
Jim
__________________
In memory of Zooker 1/11/73-7/2/2010. You will be sorely missed and never forgotten. |
06-16-10, 07:10 PM | #15 |
BassFishin.Com Member
Join Date: Oct 2009
Posts: 23
|
Why not use braid with a leader? You get the best of both worlds.
|
06-16-10, 07:18 PM | #16 | |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
Quote:
I think I'm going to pick up some InvizX, everyone's comments have pretty much confirmed my initial impression. Thanks guys Last edited by Jrob78; 06-16-10 at 07:48 PM. |
|
06-17-10, 06:21 PM | #17 |
BassFishin.Com Active Member
Join Date: Apr 2010
Location: Lakehills, Tx
Posts: 185
|
I wish there was something about fluorocarbon that I truly like, but there's not. To me, it's fragile almost to the point of being frail, & it feels like straw on my reel. I fish a lot of super thick, heavy cover. It doesn't hold up at all for me. I can retie all day & still break off if I drag a hawg out of a brushpile, over and through laydowns, & around standing timber. I've had a few heartbreaking losses with this stuff during tournaments, it makes me angry just thinking about it. For fishing plastics, I use Mean Green Copolymer, usually 17 lb. I've pulled my share of hawgs out of the wood without a single line failure & I don't have to powder it's poo-pah every other cast. I don't know why it doesn't fail me like fluorocarbon, I just know that it doesn't. I'm not going to say I'll never use fluorocarbon again, but hell will probably be a lot cooler before I do.
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|