![]() |
#1 |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
![]()
Well I missed the boat on the Prolite reels at Bass Pro because I decided too late that I would like a couple and now they are gone. I was wondering what other good finesse baitcasters are out there without spending an arm and a leg because I don't throw really light baits all that often but when I do I would kill for a baitcaster that handled them better than my Revos.
|
![]() |
![]() |
![]() |
#2 |
BassFishin.Com Member
Join Date: Aug 2011
Location: Conway, SC
Posts: 52
|
![]()
Have you seen the new Curado e50? It's pretty nasty and on sale at Tackle Warehouse for 139.88!
http://www.tacklewarehouse.com/Shima...page-SCE5.html
__________________
Men and fish are alike. They both get into trouble when they open their mouths. |
![]() |
![]() |
![]() |
#3 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
![]()
I would have to agree with C DUDE, the Curado 50E is going to be the best thing going for finesse on a budget. I have a Sol that I really like but they are harder to find and more expensive. Tony and I had a small casting contest between my Sol and his 50, both with Orange Seal spool bearings and they were pretty equal. The thing we found was that you really had to have the right rod to properly cast light baits.
I bought a ProLite and used it a time or 2 and ended up returning it. I would pick up a couple of 50 E's and not look back.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
![]() |
![]() |
![]() |
#4 |
BassFishin.Com Super Veteran
Join Date: Dec 2009
Location: Wichita, KS
Posts: 2,427
|
![]()
Kory, the Sol, or 50E will not break the bank and they both cast very nice.
__________________
They call me Ishmael |
![]() |
![]() |
![]() |
#5 |
BassFishin.Com Veteran Member
Join Date: Oct 2010
Location: Wichita Kansas
Posts: 761
|
![]()
The 50 E is nice. There have been some crazy sale prices on them in the last 2 months. I bet that the stock is getting low at many places, but there will probably be a few more deep discounts pop up before it's gone. They will go fast though. $140 is a good price for it, but I bet it will be cheaper at some more places. Most bas pro shops still have the pro lites, they are just back up to the $59 price. I have heard from many people that you can talk to them and get $10 off that to match the price they were during the classic. I have found that mine casts light baits even a little better than my E50. The reason is that the dual brakes prevent backlash just a bit better than the E50 centrifugal only system. There are a few tricks that need to be done the the pro lite to maximize it. One is you need to customize it's centifugal system. It;s an always on 4 pin system, I pull 2 of the tabs out and cut them off. With only 2 active tabs, and the mag dial, it's sweet. The other is flush the bearings and use a thin oil, thats easy to do also.
|
![]() |
![]() |
![]() |
#6 |
BassFishin.Com Active Member
Join Date: Nov 2010
Posts: 303
|
![]()
Pixy is nice. Currently looking for a ml rod to reap the full benefits of casting light stuff. It's expensive but worth it imo
|
![]() |
![]() |
![]() |
#7 |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
![]()
Well we called Bass Pro today and they said that the higher ups that call the shots pulled the Prolites off their shelves the same day that they went on sale and they didn't have any in stock. Their website showed that they were out of stock as well. We went to Springfield today to take Lake to the zoo and while we were in town I swung by Bass Pro to double check. They didn't have any Prolites in the main store but they had some next door in the catalog store for $40 so I picked up two of them. I will need to fish them as is for a little while because I have a few tournaments coming up but as soon as I can and things calm down for Kevin I will send them to him so he can work his magic on them.
|
![]() |
![]() |
![]() |
#8 |
BassFishin.Com Veteran Member
Join Date: Oct 2010
Location: Wichita Kansas
Posts: 761
|
![]()
Kory, pull the side cover off, push the bass pro button and push the nose down at the front to rotate it and remove it. Slide the spool out. Now look at the brakes, you will see the tips of the 4 horseshoe shaped tabs. Hook 2 opposite tabs with a bent stick pin or pic, anything that will hook it. Pull it all the way out and then snip the sides with a scizzors. Let it pop back in without the front section anymore and it will be a 2 pin which is just absolutly perfect for any decent user. The whole thing takes just a minute or two. Now, toset that up for lite baits, you want the total spool wieght to be as light as possible. Line is a considerable amount of wieght and that spool holds quite a bit. Braid is the lightest of the 4 types of line, FC lines are the heaviest, mono and co poly are about the same, but mono is the lightest. Fill the bottom 2/3rds of the spool with any old braid. Tie your pick of the other lines to the braid with a braid to mono blood knot or other good joining knot. Then fill the rest of the spool with that line, make sure you have enough that the knot will always be on the spool. The weight reduction is several grams and makes a big difference in start up enertia. You coukd just use all braid for the lightest, but braid has way more friction so it's not a good choice for the usable section of the line. Do both of these things and it will cast very well until we get a chance to flush the bearings for you. Now, I could easily talk you through flushing the bearings and I'm sure you could do that yourself also if you want to.
|
![]() |
![]() |
![]() |
#9 |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
![]()
Sounds good Kory, hope ya like em. I like kevins idea about the braid and such, seems like it would definitely help with casting light baits!
![]()
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
![]() |
![]() |
![]() |
#10 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
![]()
If you plan to throw truly light baits, pick your rods carefully. I think a good light powered rod is almost as important as the reel itself.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
![]() |
![]() |
![]() |
#11 |
BassFishin.Com Member
Join Date: Aug 2011
Location: Conway, SC
Posts: 52
|
![]()
I completely agree
__________________
Men and fish are alike. They both get into trouble when they open their mouths. |
![]() |
![]() |
![]() |
#12 | |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
![]() Quote:
I agree that rod selection is a huge part of throwing light baits. I have a few medium power Falcon rods that are just too light for me to use anything other than light baits on and they have been collecting dust since I don't have a reel that I don't fight with when throwing light baits so I think these will be perfect for the new reels. Last edited by carolina-rig-01; 09-04-11 at 09:49 PM. |
|
![]() |
![]() |
![]() |
#13 |
BassFishin.Com Veteran Member
Join Date: Oct 2010
Location: Wichita Kansas
Posts: 761
|
![]()
No problem Kory, I will be happy to juice it up for you.
|
![]() |
![]() |
![]() |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|