09-12-10, 06:36 PM | #1 |
BassFishin.Com Member
|
Crankbait rod question?
I mainly throw crankbaits that dive around 6feet and around 10feet. I also almost always though them in open water. Any suggestions for a good rod to use for these lures?
|
09-12-10, 06:59 PM | #2 |
BassFishin.Com Premier Elite
Join Date: Jul 2006
Location: IN
Posts: 8,308
|
I bought a Sr Croix Premier crankbait rod this year and I couldn't be happier. It's a great rod and it won't break the bank. They sell for $120.00 I'd get the 7 foot Med power with the Mod action. That should get you where you want to be, catchin bass!!!
|
09-12-10, 08:12 PM | #3 |
BassFishin.Com Premier Elite
|
It all depends on your budget. Like in most cases, I can suggest a rod that costs $60, or one that costs $450.
In the lower end range, check out the Shimano Compre crankbait rods. In the lower-mid range, the Shimano Crucial, or Powell crankbait rods. I've also heard good things about the 7' Med Mod Damiki Dark Angel too. The Lucky Craft crankbait rods are another option. In the higher-mid range, Dobyns Champion rods are awesome (and there are plenty of crankbait rods to choose from), Shimano Cumara Reaction, Falcon Cara Reaction, and Phenix Composite Crankbait rods. For high end, the Daiwa Steez FleX-Lite would be tough to beat. But again, those are $445 to $475 rods. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
09-12-10, 08:19 PM | #4 |
BassFishin.Com Super Veteran
Join Date: Apr 2010
Location: Louisville, KY
Posts: 1,119
|
I am a big fan of the BPS Crankin Sticks... I know some of the guys on here dont like the new models, but i love em. And at $79, its a killer price...
|
09-12-10, 09:50 PM | #5 |
BassFishin.Com Super Veteran
Join Date: Feb 2006
Location: Parkesburg, Pa.
Posts: 3,762
|
Kistler Argon are availabe at less than 50% of their original list. For $99 you won't find a better stick. For your specific use the 7'2" crankbait series rod would be my recommendation for long casts in open water that will keep your bait in the strike zone longer. Do you want to pay 129.00 for a 129.00 rod or $99.00 for a $209.00 rod? To me the choice is easy, buy the best for less. There are several options, but the final choice can only be yours. So do some homework and choose what's going to work for you.
http://cgi.ebay.com/KISTLER-ARGON-AF...item483a3cca15 Simmon's is great to do business with, I've bought over a dozen rods from them - I highly recommend them. Last edited by bassboogieman; 09-13-10 at 08:43 AM. |
09-12-10, 10:27 PM | #6 |
BassFishin.Com Active Member
Join Date: Mar 2010
Location: Bluff Park, Alabama
Posts: 154
|
I just bought a Kistler from Simmons Sporting Goods on Ebay for $70.00. These 7' grahite rods taht are very nice. Bought a second for my son also. These are crankin rods.
|
09-13-10, 06:18 PM | #7 |
BassFishin.Com Member
Join Date: Jul 2010
Location: Florida
Posts: 72
|
Yea I agree I like St Croix rods alot personally I dont think you can go wrong with them for the money.Get one that is 7ft long with a moderate action and either a medium or medium heavy power.
|
09-30-10, 01:01 PM | #9 |
BassFishin.Com Active Member
Join Date: Aug 2010
Location: Truman Lake, MO
Posts: 170
|
Check out the Dobyns Rods...I love my Glass Cranking Rods from them very balanced and has a unique Graphite Handle over Glass Core. Think that amazes me I can crank 10-12 hours a day and arms are not wore out due to the excellent balance and torque distribution characteristics of the rods. I love Glass because it allows the bait to function as it was designed - doesn't kill any of the action.
|
09-30-10, 01:12 PM | #10 | |
BassFishin.Com Active Member
Join Date: Jun 2005
Location: Kernersville, NC
Posts: 430
|
Quote:
http://www.basspro.com/webapp/wcs/st...003000_175-3-0 I have a few of their crankin' stick too.
__________________
Rest in peace Zooker |
|
10-01-10, 10:53 AM | #11 |
BassFishin.Com Active Member
Join Date: Aug 2010
Location: Truman Lake, MO
Posts: 170
|
Here is couple Videos that show the Dobyns Cranking Rods and another in action:
http://www.youtube.com/watch?v=LrBHuQ4Tuvk http://www.youtube.com/watch?v=5LJLDKygb1A http://www.youtube.com/watch?v=1zUr9UbWIb4 |
10-01-10, 03:50 PM | #12 |
BassFishin.Com Active Member
Join Date: Jun 2010
Location: Farmersburg, IN
Posts: 341
|
If you don't want to spend a pile on it, get a Shimano Voltaeus for around $50...
|
10-01-10, 05:49 PM | #13 | |
BassFishin.Com Super Veteran
Join Date: Dec 2009
Location: Wichita, KS
Posts: 2,427
|
Glass -VS- Graphite
Quote:
Interesting, can you go into a little more detail about your thoughts on graphite rods killing the action of crankbaits? |
|
10-01-10, 06:17 PM | #14 |
BassFishin.Com Active Member
Join Date: Aug 2010
Location: Truman Lake, MO
Posts: 170
|
Typically Graphite is a stiffer material and the stiffer the rod the more it pulls the line in a straight line back which does not allow the bait to move. I use some special - custom built Square Bills and graphite rods do not allow these baits to "hunt" from side to side. A Glass rod does not do this and allows the bait to work as it was designed. Some of these baits will cut a 5' to 6' swath - 2' to 3' off center - running back and forth. Graphite rods and I've tried a pile of them cut about a 1' to 2' swath...totally killing the effectiveness of these baits and why bass cannot resist them.
|
10-01-10, 07:34 PM | #15 | |
BassFishin.Com Super Veteran
Join Date: Dec 2009
Location: Wichita, KS
Posts: 2,427
|
Quote:
One of the great things about fishing is the incredible amount of choices we have. I think it comes down to each individual and his/her preference. While mine is with graphite, I certainly respect your opinions about glass. |
|
10-02-10, 09:59 AM | #16 |
BassFishin.Com Active Member
Join Date: Aug 2010
Location: Truman Lake, MO
Posts: 170
|
Exactly...everyone has their choice and the Reason Dobyns builds both Glass and Graphite Cranking Rods in the same action but for me Glass outperforms and does what I need it too do. Glass is much more forgiving of a material plus the way it loads up. I prefer the fish to load up with a crankbait rod - vary rarely do I set the hook on a crankbait more of a swift pull to set the hooks. That's one of the things with graphite is to much sensitivity and you will over set or pre-maturely set the hook before the bait is in the fish for most successful chances of landing the fish. You can condition yourself for delaying the hooksweep but I would rather have them load up on their own. Yes glass has less sensitivity and that's one of the positives for me! That's one of the things I like with the Dobyns he has increased sensitivity with a Graphite butt section but still gives me the glass I want that increases my landing percentage. Moving baits do not require the same feel requirements for me as does others. You have to find what works for you...that's the thing about manufacaturers today they have a tremendous variety.
Get what works for you... |
10-02-10, 10:53 AM | #17 | |
BassFishin.Com Premier Elite
|
Quote:
Dobyn's Glass rods are actually pretty unique in the crankbait rod world as they feature a "fast" action. Because it's still glass, it's not the fast action we're used to in a graphite rod. And despite its fast action, it still has that soft forgiving element of glass rods. However, their graphite CB rods are a MF action, which is typical of crankbait rods. Also, I'm pretty sure Dobyns Glass CB rods aren't composite rods, they're all glass. I've never heard of them having a graphite butt section. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
|
10-02-10, 11:19 PM | #18 |
BassFishin.Com Active Member
Join Date: Jun 2005
Location: Kernersville, NC
Posts: 430
|
Doug is an expert.
http://proxy.espn.go.com/outdoors/ba...d=18392&type=7 I have a glass rod that's hardly used because its too "wimpy" like a noodle. Hate it. Overall I prefer a composite rod for crankin'. Better distance and more accurate. Best of both world.
__________________
Rest in peace Zooker |
10-03-10, 12:55 AM | #19 | |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Brighton, MI
Posts: 2,414
|
Quote:
If you are on a tight budget give them a try. |
|
10-03-10, 10:14 AM | #20 | |
BassFishin.Com Active Member
Join Date: Jun 2010
Location: Farmersburg, IN
Posts: 341
|
Quote:
|
|
10-03-10, 11:09 AM | #21 |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Brighton, MI
Posts: 2,414
|
Not bad at all. I don't think that I would like it for say a jig rod, but the MH "fast" seems pretty good for deeper crankbaits. Maybe the Medium would be better for the 6' divers that Mikekw3 asked about.
I was just giving it a bend test and the closest rod I have to it is the KVD Tour 7' Medium cranking rod. It is funny how much ratings vary from mfg to mfg. It is different than another MH Fast that I tried against it. |
10-03-10, 01:06 PM | #22 |
BassFishin.Com Active Member
Join Date: Jun 2010
Location: Farmersburg, IN
Posts: 341
|
I wouldn't use it for anything but cranks or maybe big thumper spinnerbaits. I used mine (7 foot MH/F) the other day for everything from 6-18 footers with no issues. Seems more like a M/F to me...I do like the composite feel though. You can feel the vibration fine but it's not like holding on to a drill with a bent bit...
|
10-05-10, 07:00 PM | #23 |
BassFishin.Com Super Veteran
Join Date: Jun 2006
Location: Spotsylvania, VA
Posts: 4,483
|
I use St. Croix S-glass rods. They're 10 years old but work well. Not too expensive or at least weren't when I got them.
Friend of mine likes Kistler and KVD Quantum but likes the older model at $70 vs the new ones at $150. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|