01-24-12, 05:09 PM | #1 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
opinions on spinning rods.
Gonna get a couple new rods and wanted advice. One for dropshotting and throwing flukes. The other would be for finesse jigs and senkos. Would ideally be 7'0" and under $200.00. Any input would be greatly appreciated.
|
01-24-12, 05:29 PM | #2 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
Sorry, just to clarify under 200.00 each.
|
01-26-12, 03:23 AM | #3 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
Wow is everybody fishing with a can and kite string or is question that idiotic?
|
01-26-12, 03:35 AM | #4 |
BassFishin.Com Super Veteran
Join Date: Aug 2011
Location: rock hill, sc
Posts: 2,315
|
For $200 you can pick from some nice rods. I'd take a look as St Croix, Shimano and the new Quantum smoke with the mirco guides just to name few. You can see all the specs by clicking on a Tackle Warehouse banner above and can get reviews and vids by going to Tackletour.com
__________________
Sometimes you gotta risk it to get the biscuit. |
01-26-12, 10:02 AM | #5 |
BassFishin.Com Super Veteran
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
|
Guess im an oddball,use mostly baitcasters but do own several spinning outfits,(used)none of which cost over 40 bucks.200 you can pick just about any brand including GLoomus.
|
01-26-12, 10:51 AM | #6 |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
I'd take a look at the St.Croix Avid rod. Never fished em, but they feel really crisp in hand, I really like they way they feel compared to other rods in the same price. I'd also look at the Dobyans Savvy, and Shimano Cumara.
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
01-26-12, 12:56 PM | #7 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
I tried a couple g loomis rods and don't really like them. To soft and a little heavier than I like. I checked the St croix rod. I like the way they feel but haven't used them. I've been doing my homework on the dobyns savvy series and shimano crucial rods also. Everything sounds good with them.I need to go handle them I guess. When I say finesse jigs I'm talking about 1/8 ounce jigs thin skirts and 1 1/2 trailers. I'm thinking medium fast for that.
|
01-26-12, 01:12 PM | #8 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
I should add. I'll be pairing these rods with pflueger presidents. I usually run 20 pound braid with flourocarbon topshot.
|
01-26-12, 03:11 PM | #9 |
BassFishin.Com Super Veteran
Join Date: Dec 2009
Location: Wichita, KS
Posts: 2,427
|
Might want to take a look at the Falon Bucoo, good quality rod that will not break the bank, if you want a little more rod take a look at the Cara lineup.
__________________
They call me Ishmael |
01-26-12, 04:15 PM | #10 | |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
Quote:
Also take a look at the Abu-Garcia Veritas lineup. They are very light rods and seem to have a little more backbone than some other brands with the same ratings.
__________________
You only live once. But if you do it right, once is enough. |
|
01-26-12, 05:57 PM | #11 |
BassFishin.Com Super Veteran
Join Date: Apr 2005
Location: WA State
Posts: 1,783
|
Look no further than a Lamiglas Excel or Shimano's Compre rods. Great bang for the buck is the name of the game for a $200 budget.
__________________
ARX "If people concentrated on the really important things in life, there'd be a shortage of fishing poles." Doug Larson (Shimano 2005 Reel Catalog) |
01-26-12, 06:11 PM | #12 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
How is the warranty on the shimanos? Dobyns warranty is great. Idk about St crouch warranty either.
|
01-26-12, 07:48 PM | #13 |
BassFishin.Com Veteran Member
Join Date: Aug 2011
Location: Bucks County, PA
Posts: 714
|
|
01-26-12, 08:24 PM | #14 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
I would check out the Falcon Cara Kriet Squirrel Tail rod, awesome spinning rod but at the very end of your budget. The Lamiglas Excel is another rod that doesn't get the respect it deserves, great rods for the money and made in the USA.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
01-27-12, 07:18 PM | #15 |
BassFishin.Com Super Veteran
Join Date: May 2006
Location: Accokeek MD
Posts: 3,315
|
I want add one to your selection. Berkley makes a few rods that are so nice. Well let's just say they work. The Lightning series and the Hunter series if you can find them will change your 200 dollar a rod habit real quick. One piece BTW..
Capt Mike PS St Croix are also good..but twice the price.
__________________
Capt Mike Starrett light tackle guide Potomac River http://www.indianheadcharters.com |
01-27-12, 09:43 PM | #16 | |
BassFishin.Com Active Member
Join Date: Jun 2010
Location: Farmersburg, IN
Posts: 341
|
Quote:
|
|
01-27-12, 11:50 PM | #17 | |
BassFishin.Com Super Veteran
Join Date: Jun 2011
Location: JANESVILLE,WI. 53545
Posts: 3,415
|
Quote:
Lower end are 5 years, I think it starts at Primier down.
__________________
"Fishing isn't life or death... it's more important than that." |
|
01-28-12, 12:09 AM | #18 | |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
Quote:
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
|
01-28-12, 01:36 AM | #19 |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
I think the rods built on SCII blanks are made in Mexico, the Premier, Triumph and Mojo.
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
01-28-12, 09:20 AM | #20 |
BassFishin.Com Super Veteran
Join Date: Jun 2011
Location: JANESVILLE,WI. 53545
Posts: 3,415
|
Jrob78 is kinda right. This kind of explains St.Croix's philosophy. I don't know which ones are actually assembled in Mexico.
Not just "Handcrafted in North American" but "Handcrafted in Wisconson" Sounds better, don't you think? If your ever in the Park Falls area I highly recomend visiting the factory. It may amaze you, did me anyway. I don't know if you still can but you used to be able to choose a Rod and actually watch them make it and take it home after the Tour. I did this for one of my Legends rod. I enjoyed every minute of tour! I enjoyed MY ROD even more! (had to open that door ) SO MUCH GOES INTO A ST. CROIX ROD SO YOU CAN PULL SO MUCH OUT WITH ONE. Examine a St. Croix rod closely and you’ll find a wealth of innovations and craftsmanship. But, in light of the fact you’d rather be fishing than sitting over a microscope, allow us to explain what makes a St. Croix rod so special. The journey begins in Park Falls, Wisconsin and eventually leads to Fresnillo, Mexico. It is in Park Falls that a rare combination of blazing technology and genuine handcraftsmanship come together to make incomparable fishing tools. A tradition that continues for a select series of rods in Fresnillo. THE SILICON VALLEY OF FISHING – IMAGINE. Anglers often think of Park Falls as a high-tech mecca. After all, there is nowhere else incorporating St. Croix’s proprietary ART™ and IPC® technologies. Likewise it’s here, and only here, that rod designers stand side-by-side with engineers bringing their ideas to fruition so smoothly. It’s here you’ll also find the software St. Croix developed so blanks are built to the highest standards in the industry – a tactic that is the foundation leading to superior performance and durability. Laser micrometer and laser alignment machinery assures every guide and handle is put on perfectly straight. There are rod-building tools here that other rod builders can only dream about. Of course, you can plug in a bunch of machines anywhere there’s electricity. What’s at the heart of a St. Croix rod is the time-honored blend of technology and handcraftsmanship. In Park Falls, over thirty pairs of hands contribute to three dozen different steps before a St. Croix rod is deemed ready to charge into the world looking for action. Thirty pairs of hands attending to every last minute detail. Thirty pairs of hands making sure a rod doesn’t leave Park Falls until it’s ready to take on any fish in the world. SEE FOR YOURSELF. BETTER YET, FISH IT FOR YOURSELF. If you’re ever in Park Falls, feel free to swing by and see how a St. Croix rod comes to life. After a thorough testing (of the rod), we’d be happy to hook you up with one of your own to try out wherever you see fit. ST. CROIX VALUE. KEEPING IT ALIVE IN NORTH AMERICA. Of course, there are only so many hands in Park Falls, Wisconsin and over the years, the undeniable value of St. Croix rods has meant more and more people have wanted to fish one. Which means every year, more and more rods leave Park Falls for waters throughout the world. Well, it’s gotten to the point where we simply can’t make enough in our Park Falls factory. It’s a small town. (And we’d like to keep it that way.) Faced with a decision of opening another factory or outsourcing to Asia, we concluded the only way to ensure a St. Croix rod remains a St. Croix rod was to construct a second factory in Fresnillo, Mexico. If you happen to be traveling through Fresnillo, you’ll find an almost mirror facility to our state-of-the-art Park Falls operation – same equipment, same manufacturing procedures and the very same quality control protocols. Our Fresnillo facility manufactures a select group of rods that are designed and engineered here in Park Falls. These rods offer the chance for an even greater segment of the fishing population to get their hands on a St. Croix. Rod models currently manufactured in Park Falls will continue to be made in Park Falls. By making sure all our rods are “Handcrafted in North America,” we are able to continue providing anglers with the best value in angling. Warranty link; http://www.stcroixrods.com/category/...e_and_warranty
__________________
"Fishing isn't life or death... it's more important than that." Last edited by joedog; 01-28-12 at 09:50 AM. |
01-28-12, 03:26 PM | #21 |
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Shimano Crucial
-Mark |
01-28-12, 05:44 PM | #22 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
Got one of the rods today. Dobyns 7'0" medium fast savvy series. A little shorter on the butt section than I like but, we'll see. Tried a number of different rods. Pretty much everything on this thread and this one won me over. Just gotta go try it out. Hitting dvl in the morning. Then we'll make a decision on the next rod.
|
01-31-12, 03:45 PM | #23 |
BassFishin.Com Member
Join Date: Dec 2011
Location: menifee, CA
Posts: 29
|
Went home with the stinky smell Sunday. The rod felt nice though. Went to the lake next door today and, fell in love. Only got two in the two hours I was there but the rod works great. I was throwing the homemade finesse jig 1/8oz. Going to have to grab the medium light for dropshotting.
|
02-01-12, 10:07 PM | #24 | |
BassFishin.Com Member
Join Date: Jan 2012
Location: SW Michigan
Posts: 49
|
Quote:
|
|
02-01-12, 10:51 PM | #25 |
BassFishin.Com Premier Elite
Join Date: Jan 2009
Location: Shawano, WI
Posts: 7,761
|
My premier says made in America, but the Mojo I know for sure is made in Mexico.
__________________
If you can't fix it with heavy squats or fish oil, you're probably going to die. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|