08-14-04, 01:48 AM | #1 |
Guest
Posts: n/a
|
C-rigging
I have always used a large sinker (3/4 to 1oz.) for may carolina rigs. Has anyone experimented with smaller sinkers such as the mojo type (1/4 to 1/2 oz)? Just wondering because I'm going to try it this weekend in our club tourney.
|
08-14-04, 02:31 AM | #2 |
BassFishin.Com Member
|
Re: C-rigging
GUY,
I have never tried a Mojo type weight, I used to use bullet weights. Lately I have been using 1/2 or 5/8 oz Jig-N-Pig for a weight. Double your pleasure, double your fun, it gives you two different lures to entice the little buggers. JackL |
08-14-04, 03:42 AM | #3 |
BassFishin.Com Veteran Member
|
Re: C-rigging
I've tried the mojo weights 1/8oz-1/4oz, usually rig a 4" handpour worm or a 4" lizard on the business end. Works for me ;D
|
08-14-04, 10:54 AM | #4 |
BassFishin.Com Member
|
Re: C-rigging
Yep. Adjust your weight on a Carolina Rig for the depth and cover you'll be fishing. I used a light sinker a lot when fishing around grass and such, or in real shallow water.
|
08-14-04, 11:57 AM | #5 |
BassFishin.Com Member
|
Re: C-rigging
Yes, but I do it a little differently. Rather than using an egg sinker and a glasss bead I use two tungsten weights. They make a louder click that lead and glass, won't break like glass beads sometimes do, and won't get bent like lead will. Never thought the weight getting bent or deformed was a big deal intil I noticed it bent just enough to get a real sharp edge that was about to cut through the line.
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | Rate This Thread |
|
|