OK, Who Can Do It?

[JB]

So, I'm surfing the net the other day at break, and find a video on how to open any pad lock with a pop can. You take a knife and cut about a 2 by 3 inch strip of popcan, cut a M into it and fold, then insert into a pad lock,
hold down the metal while pulling up on the lock.
Works everytime for the kid on the video, yet I have YET to make it happen.
Heres the link to the video, if anyone can make it work give me a shout out..
I read where it takes practise.

click link

[Jim80]

I'll try it but will most likely end up slicing my finger open , hahaha

[Sluggo Man]

I'll have to try it sometime... I don't think there are any soda cans around my house right now believe it or not!

I wonder how long it will be before burglars are robbing people with soda cans.

[zooker]

it is a abasic padalock shim..

zooker

[bamabassman]

cool. that'll help him when he gets in da slammer, lmao.

[1/4 stick]

Don't work on cell doors.

[bamabassman]

i know what works on handcuffs. ball piont pen barrel, take out the ink part and cut it off at the right length, glue a little peice on da side...learnt dat from an inmate while working fo da county down south.

[cassidyta]

not sure about a soda can, but I am hell with bolt cutters

[lowrider]

or a plasma cutter...if you don't care about the collateral damage

[crankybait]

cordless dremel with the reinforced blades would be a better option... hah
but The pop can thing seems plausible... let you know after i try it on the shed

[BigBassin144]

I tried it today, and ended up braking 6 of those things, and still nothing.

BB

[zooker]

remember this the soda can is an OFF BRAND it means thinner aluminum than if you used a coke can or a pepsi can which use a thicker gauge..

zooker

[Lancer6]

Seems there're quite a few jail alumni here at BF.C.
One is often judged by the company one keeps.

L6
Tiptoeing quietly away.

[BigBassin144]

Originally Posted by zooker

remember this the soda can is an OFF BRAND it means thinner aluminum than if you used a coke can or a pepsi can which use a thicker gauge..

zooker

So you saying it is better that we have thinner aluminum? Cause I was using a pepsi can, and I still broke 6 of those little things. And the dang thing is still locked.

BB

[MrPhotographer06]

i bet i can do it




i've gotta go to work .. but i'll try it after i get off

[Bo Dale James Jr.]

Do you think, those were his mom's "good scissors"?
Cool trick.

[MrPhotographer06]

me and my best friend are about to try it.. we've got multiple cans so we can trial and error it..

gotta get a combo lock to see if its only combo locks.....

[bamabassman]

l6..i ain't a jailbird, although i DID stay at a Holiday Inn Ezpress last night, hahahaha. used to work state inmates for 7 long years. learned alot of things i really don't want to know. lmao. seen things a grown man shouldn't see either, hahahahahaha.

[MrPhotographer06]

IT WORKS! heh heh.. told yall i could do it

it took 3 diffrent "keys"

tedious work though.. the design of the "key" is critical because too skinny then it'll snap too wide and it wont slide in and wont stay close to the lock thing..

i got it twice in a row.. then i broke the key..

pretty exciting adrenaline rush. but it can only be done on a combo. lock.. they have angled little locking mechanisms.. regular locks have flat ones

[buddy_fuentes]

Take a hammer and hit the lock straight down on the locking side. It will open Master Locks...yep, the ones that they shoot and don't open.

Buddy

[MrPhotographer06]

yep.. my dad was at work and he locked his keys in his locker.. and a dude said= dont worry.. got two ball peen hammers and it the at the same time on each side and it popped open