03-09-10, 09:21 PM | #1 |
BassFishin.Com Member
Join Date: Jan 2010
Posts: 29
|
Jon Boat Remodel
So here is my situation. I have a 16' semi v jon boat that leaked like a sieve when I first bought it. I put it in the water and tried to find all the leaks and marked them, but it got to the point that there were to many. Instead I used NP1, which is a polyurethane based sealant, and caulked all the rivets, seams, and screws from the inside and out. Now, 4 years later I am doing a complete overhaul. New floors, decking, transom... the whole 9. I wanted to know how to make it as water tight as possible. I don't want to have to take the floor up again. Is there anything I can spray in the bottom over all the NP1 I already have in there? I bought some of the bostik 920, but I would think with all the synthetics on the market something has to exist I can coat the inside with that will seal it. I have heard the spray in bedliner doesn't work, although that was my first idea. Thanks for any advice!
Last edited by AMC23; 03-09-10 at 10:02 PM. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | Rate This Thread |
|
|