Phenix T46 Build

Bubba_Bruiser · 03-02-12, 01:08 AM

I am working on 2 Phenix blanks and I finally finished one of them. This is a K2 714MH-F. The blank came in at 3.1oz finished. I think I could have came in under 3 with cork, minus checks, but I went with what the guy wanted. I used a Castaway Super Exposed real seat, Fuji BLCAG lowrider double foot 6 & 5 & BLAG 4s to finish it out. The thread work was kept minimal with variegated black/grey , which I have no problem doing. But I did shave the grips down on my lathe and did some notch work on it. Word to the wise, I learned a lesson building these. Nylon thread will take a lot of color preserver do to the raised graphite. But here they are:

03-02-12, 01:08 AM	#1
Bubba_Bruiser BassFishin.Com Super Veteran Join Date: Feb 2009 Location: South MS Posts: 3,659	Phenix T46 Build I am working on 2 Phenix blanks and I finally finished one of them. This is a K2 714MH-F. The blank came in at 3.1oz finished. I think I could have came in under 3 with cork, minus checks, but I went with what the guy wanted. I used a Castaway Super Exposed real seat, Fuji BLCAG lowrider double foot 6 & 5 & BLAG 4s to finish it out. The thread work was kept minimal with variegated black/grey , which I have no problem doing. But I did shave the grips down on my lathe and did some notch work on it. Word to the wise, I learned a lesson building these. Nylon thread will take a lot of color preserver do to the raised graphite. But here they are: __________________ \,,,,/ ROCK ON! HRN4L!

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)