07-06-12, 12:37 AM | #1 |
BassFishin.Com Super Veteran
|
Some rods I have been working on
Here is a set I built for a guy and his wife to match their 40th Anniversary Lund in red/grey/black.
This is a 6'6" MHX 782 M-F casting with a 7" grip, 6,5,4mm micro guide set up. This is a Batson RX7 843 MH-F spinning rod I built to match the other one. I built this one with the Castaway wave guide. A lot of people are skeptical of this guide and its purpose, but it is smooth as silk to me. I will be the first to admit, I don't like spinning gear for the fact I am not efficient in casting with it and I hate the noise and line slap they give. With this guide and introducing micro guides, it is eliminated. The line is tamed out the gate and is a smooth rope instead of line slapping all the way to the tip. I had 2 heart breakers building this rod. 1 was when I was static testing, something popped and rod went one way and the tip insert came out. I flexed the rod for damage and all was good, but I had to wait a few days for the tip. Then I had finished the base wrap of the tiger with the third coat and it shucked out of the finisher after I walked out of the room and ruined the epoxy...which led to a strip and redo. But here are some pics of the build: Thanks for the hot sticker JRob: This was a heart breaker.
__________________
\,,,,/ ROCK ON! HRN4L! |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|