09-14-06, 09:15 AM | #1 |
BassFishin.Com Member
Join Date: Jan 2006
Location: savannah ga
Posts: 7
|
bass boat lids
looking to find someone who may know where i can get new lids to make my older bass boat have a tight flush deck like the new ones
|
09-14-06, 01:22 PM | #2 |
BassFishin.Com Active Member
Join Date: Jul 2004
Location: Dallas, NC
Posts: 316
|
If you are just looking for the lids that go into holes like you see on bass boats, then you can get those at Bass Pro Shops or Cabela's either one. Just check them out on line.
__________________
cast, reel, cast!!! Repeat if necessary!! Dallas, NC |
09-14-06, 05:04 PM | #3 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
depends on the boat but yeah i have to go with booger..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
09-15-06, 10:37 AM | #4 |
BassFishin.Com Member
Join Date: Jan 2006
Location: savannah ga
Posts: 7
|
no i have the original lids but they have a huge gap around them and the back deck I'm afraid somebody will wind up loosing theyre balance the boat is a 78 procraft so you know how the older boat decks were, i'm looking for a sleeker better functioning set up. has anyone heard of a deck type rubber thick stuff but hard enough to walk on?
|
09-15-06, 10:55 AM | #5 |
BassFishin.Com Active Member
Join Date: Jul 2004
Location: Dallas, NC
Posts: 316
|
There was some of that rubber stuff on my boat when I bought it. I ended up taking it off and putting carpet down because it wasn't letting any moisture escape and my wooden floor was getting warped and I was afraid it was going to start rotting if I let it on.
__________________
cast, reel, cast!!! Repeat if necessary!! Dallas, NC |
09-23-06, 08:19 PM | #6 |
BassFishin.Com Member
Join Date: Sep 2006
Location: Crosby-Texas
Posts: 5
|
bass boat lids
I just went thru this ordeal.. and I have a 86 king fisher.1 of the live well lia=d's was brockwn.. bass.. or cab.. or any place had the lids...I would go to some one that can do fab work..and have them make you what you need ,,.find some fab shop that does aluminum ask them to make them
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|