04-03-10, 12:36 PM | #1 |
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Hotter NGK Spark Plugs
Well, with the new boating year upon us, it was time for me to install a new set of spark plugs in my Yamaha150.
Earlier this month I pulled my old plugs for a visual inspection and noticed that my old Autolite plugs had some "black deposit buildup", leading me to believe that these plug were not burning properly and not hot enough for my motor's setup. Following a boat mechanic's recommendation, I went with a standard set of NGK spark plugs that were one number hotter in hopes that this would correct my motor's lack of combustion. Well here are my results: With the muffs on, the first thing that I noticed was how much easier my cold motor was to start. The motor fired on the second try and "warmed up" much much quicker. The sound of the motor at idle with the "muffs on" was music to my ears. My boat's response on the water was very noticeable, compared to the boat's performance with the colder autolite plugs. Final inspection of the new plugs showed no sign of the "black build up" previously found on my old Autolite plugs. This time the plug's electrode and tip showed the brownish bronze color, or perfect combustion. I do plan to inspect my new plugs on occasion for continued proper combustion. Of note: if the electrode and tip turn a "white color" the plugs are too hot and can possible burn a hole through your pistons. SO BE ADVISED AND BE CAREFUL WHEN INSTALLING HOTTER PLUGS. -Mark |
04-03-10, 02:46 PM | #2 |
BassFishin.Com Premier Elite
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
|
Mark,
So you're saying the plug specified for your outboard doesn't burn quite hot enough? I seem to remember you saying something about using a different oil than was specified for your engine....Penzoil maybe? Do you think it's possible that is why it is getting the carbon deposits? Either way, it sounds like you have a combination of plug and oil that is working well for you. P.S. Yes, the sound of a purring outboard, ready to roar to life at a moment's notice, after a long Winter is indeed very sweet!!
__________________
Many men go fishing all of their lives without knowing it is not fish they are after. |
04-03-10, 05:28 PM | #3 |
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Well, back in the spring of 2009 when I was installing new plugs, the parts store didn't have the OEM NGK #8 spark plugs for my Yamaha. So instead I chose to use an equivalent Autolite plug with poor results. This year I was able to locate some NKG plugs and decided to try a #7, which is one # hotter on NGK's reverse temperature rating scale. The bottom line is showing a much better result indeed.
Yes, I've been using Penzoil TCW3 and 87 octane. -Mark |
04-03-10, 06:11 PM | #4 |
BassFishin.Com Premier Elite
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
|
__________________
Many men go fishing all of their lives without knowing it is not fish they are after. |
04-03-10, 08:09 PM | #5 |
BassFishin.Com Premier Elite
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
|
Thanks mark, this is something i am gonna look into as well. It seems to take the ol johnson quiet a while to "warm" up. Maybe i too am using the wrong plug. AND the wrong oil too.
__________________
so many lures, so little time. |
04-03-10, 09:34 PM | #6 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
90% of the newer moters use ngk for a very good reason. Also woody remember to run ring free or sea foam in EVERY tank of gas.Those yammer hammers do not like american octane gas or ethonal juice..They are tuned for the japanese watered down 84 octane..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
04-04-10, 12:21 PM | #7 | ||
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Quote:
http://www.ngksparkplugs.com/ http://www.youtube.com/watch?v=LbR75...ayer_embedded# Quote:
-Mark |
||
04-04-10, 04:07 PM | #8 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
Staybil only stops the gas from turning into terpintine.sea foam or ring free is the ONLY thing to use in yammers. I use 1 fl oz per tank.my carbs are spit shinny..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
04-04-10, 06:32 PM | #9 |
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Thanks for the info, Zook. I'll get a few cans of Seafoam.
-Mark |
04-06-10, 03:48 PM | #10 |
BassFishin.Com Veteran Member
Join Date: Jan 2006
Location: Paducah, KY
Posts: 730
|
I have a 2006 Mercury motor and the plugs have never been changed and I was looking at NGK plugs. I was calling around to some places like autozone and advance autoparts thinking that they might have them. Well, they did not have them and they told me that I could get an autolite plug that was the same thing as ngk for a lot less money. I am not a mechanical person so I am asking everyone's thoughts. Based on the posts in this thread, I would say the person I talked to is wrong. Woody, I am not trying to take over your thread but it seemed to go with what you had posted.
|
04-08-10, 08:09 PM | #11 | |
BassFishin.Com Super Veteran
Join Date: Mar 2008
Location: Jonesville, Indiana
Posts: 3,597
|
Quote:
-Mark |
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|