12-09-07, 11:21 AM | #1 |
BassFishin.Com Premier Elite
|
Carolina Rigging
This is one of the techniques I am going to learn this spring. I have already picked out a rod/reel, weights, beads, hooks, bait. Anyways. I have read that using braid and then making the end of the C-rig out of mono is good. But I want to know what you guys use.
The other thing is probably the most important thing I need to know... How do you retrieve the C-Rig. Most of the articles I have read only go over tackle and things. the ones that did cover actually fishing it, didn't do a very good job. Thanks for all the help you guys! BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
12-09-07, 12:38 PM | #2 |
BassFishin.Com Super Veteran
Join Date: Sep 2002
Location: Lexington,NC-Worlds best BBQ.
Posts: 1,945
|
The carolina rig is best when used for deeper fish in the late summer.
Granted it can be used for shallow fish as well, although other baits may work at this time of year. I preferably use a 3/4 oz. Tru-Tungsten weight. For line I like to use 17 lb test flourocarbon with a 14 lb test flouro. leader. The reason: flouro is more sensitive than mono and the stretch is not as bad as mono. Braid may be more sensitive than flourocarbon but I don't use it due to several different reasons. When retrieving I pump the bait amongst rocks, stumps or anything else that might cause a hangup. When on smoother bottums, I drag my bait. Your leader (in my opinion) should be between 18" and 36" long.
__________________
Lexington,NC. Last edited by bassnman30; 12-09-07 at 12:43 PM. |
12-09-07, 12:38 PM | #3 |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Avoca, NY
Posts: 3,508
|
http://www.basspro.com/webapp/wcs/st...10000_100-10-3
This is what I have been using as of last summer.I carolina rig outside weed edges, primary points and sloping, or stepped drop off areas.I use 20 lb braid for the mainline and 16 lb fluorocarbon leader to the lure.I primarily use 4 baits when carolina rigging. 1. Yamamoto lizard in #214 color which I call bluegill. 2 Zoom centepede(4" french fry ) Cotton candy is my go to color. 3 Wave worm Bamboostick, sweet potato is my favorite Waveworm color. 4 Zoom trick worm. I use Junebug and Watermelon the most. Whether you drift with the wind, or cast and fish as you would a worm, or drop it down and use the trolling motor to slowly crawl around with, you can't go wrong using the carolina rig. P N J |
12-09-07, 12:47 PM | #4 |
BassFishin.Com Member
Join Date: Jan 2004
Location: burnsville,mn
Posts: 24
|
in bassmaster mag new book series they give two good techniques for carolina fishing.one is using a sideways sweep of the rod to drag the weight along the bottom. the other is to hop the weight off the bottom.
__________________
nothing more peaceful than being on a river in the morning. |
12-09-07, 05:39 PM | #5 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
i prefure to drag mine. there is two differant methods the sweep or the pump. both work i use the sweep my self..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
12-09-07, 06:16 PM | #6 |
BassFishin.Com Premier Elite
|
Thanks everyone! This should help me out a great deal. Looks like I'll be using my rod with 20lb braid on it and adding a fluorocarbon leader. I will be trying both sweeping the rod and hopping the bait off the bottom.
Thanks again, BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
12-09-07, 11:36 PM | #7 |
BassFishin.Com Active Member
Join Date: Jun 2006
Location: indianapolis, in
Posts: 267
|
Try changing lures and or length of leader before you switch to a nother technique.
|
12-10-07, 09:15 AM | #8 | |
BassFishin.Com Premier Elite
|
Quote:
BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
|
12-10-07, 11:46 PM | #9 |
BassFishin.Com Premier Elite
Join Date: Jun 2003
Location: San Antonio, TX
Posts: 10,141
|
I use 50 lb braid with a 17 lb Vanish (Yes, Vanish-crappy on a reel but makes a great C-rig leader) fluorocarbon leader.
I fish a lot of rocky lakes where it is snag city using a conventional C-rig setup. So, I use a Lindy Rattlin' No-Snagg sinker. It is a banana shaped weight with a built in rattle and comes through rock surprisingly well. I drag mine, too, and set the hook with a side sweep.
__________________
It's happened to the best of them: John 21:3 |
12-11-07, 10:35 AM | #10 |
BassFishin.Com Super Veteran
|
I like the looks of these steel weights from Bass Pro. I may try the 1/2 or 3/8OZ next year for my C-Rigs.
<H1 class=breadcrumb_bold>Ultra Steel 2000® Egg Sinkers </H1> Not too pricey either; $2.99/12. -LL- This lead free, environmentally smart weight offers greater sensitivity and feel, retains its shape better for less line fray and improved snag resistance. 12 pack.
__________________
I don't see why schools are Public. If all schools were made Private, trespassers would be eliminated! |
12-11-07, 10:50 AM | #11 | |
BassFishin.Com Super Veteran
Join Date: Nov 2007
Location: Cartersville, Georgia
Posts: 1,472
|
Quote:
http://www.fishingworld.com/Brannans...U=TopBrass-PJO As you can see I order mine through Brannan's Bass Pro Shop (Paris, TX). My goto is the 3/4 oz. The reason I use the cylindrical weight is two-fold, 1st it is extremely weddless and rockfree, second is that it makes a solid clicking sound with the blunt ends when it contacts hard objects (this is transmitted easier to the rod holder and it also mimicks crawfish in addition to the clacker and beads). Bullet shaped sinkers tend to wedge in the crevices and limb intersections and get hung a lot more. As far as how I retrieve the c-rig, that depends on what the fish want. For consistency I always start with a long leader (4-5'), instead of varying the leader length (when I am not using floating baits, which is most of the time), I vary my retrieve speed until I start catching fish. "Rule of Thumb" if I feel a hard bottom in the middle of mushy stuff I ALWAYS slow down and fish it thoroughly!
__________________
Bob Smith a.k.a. "Porko" (vintage Strike King variety!) |
|
12-11-07, 09:30 PM | #12 |
BassFishin.Com Premier Elite
|
Well, Thanks again guys!
I think I'll do pretty good with it this spring/summer. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
12-11-07, 10:49 PM | #13 |
BassFishin.Com Super Veteran
|
Well, first of all, I'd like to say that you have had a lot of good, question-raising posts lately BB144. But, I still have just one question.
Today I got my stuff from BTE, Barlows Tackle Express, and one item, I ordered 10" ribbontail worms. 5'' are worm, and the other 5" is "ribbon". So I was thinking, instead of using a bait like a DT22 or DD22 and crankin' your arm off to locate deep Summer fish, use a C-Rig with this long 10" worm to get their attention. Wouldn't it work? I mean, 10" is a lot of worm, you might not get every bite hooked up, but the worms is so big, it would be easy to locate fish that are deep. Do you Guys think using this worm, or larger, could/would locate deep Summer fish? Would it truly get 'ya more bites -vs- Crankin' your arm off? -LL-
__________________
I don't see why schools are Public. If all schools were made Private, trespassers would be eliminated! |
12-11-07, 10:52 PM | #14 | |
BassFishin.Com Premier Elite
Join Date: Jun 2003
Location: San Antonio, TX
Posts: 10,141
|
Quote:
__________________
It's happened to the best of them: John 21:3 |
|
12-11-07, 11:11 PM | #15 |
BassFishin.Com Super Veteran
Join Date: Nov 2007
Location: Cartersville, Georgia
Posts: 1,472
|
Reb, the answer to that is yup!! I like to add the brass disc style clacker between the weight and the Glass Bead! It's like adding bait attractant to your bait, it may or may not work but darn sure doesn't hurt it!
__________________
Bob Smith a.k.a. "Porko" (vintage Strike King variety!) |
12-12-07, 06:24 PM | #16 | |
BassFishin.Com Premier Elite
|
Quote:
BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
|
12-12-07, 07:47 PM | #17 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
the bead protects the knot the weight slams into the bead making a clickin sound. a brass clacker some times works. but i can't bring myself to use one. just a sinker and a bead for me most of the time..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
12-12-07, 07:58 PM | #18 | |
BassFishin.Com Premier Elite
Join Date: Jun 2003
Location: San Antonio, TX
Posts: 10,141
|
Quote:
Thanks, Bob! I'll give it a try.
__________________
It's happened to the best of them: John 21:3 |
|
12-13-07, 08:44 AM | #19 |
BassFishin.Com Veteran Member
|
40lb superbraid w/ 16lb flouro leader
__________________
U.S. Navy "The object of war is not to die for your country, but to make the other bastard die for his" - Gen Patton |
12-13-07, 10:08 AM | #20 | |
BassFishin.Com Super Veteran
Join Date: Nov 2007
Location: Cartersville, Georgia
Posts: 1,472
|
Quote:
There are a couple of reasons for that, the first being the glass protects the knot better than the brass. The second is that the brass on brass creates a slightly different clicking sound, followed by yet another sound when the clacker hits the glass. As Zooker pointed out, it may not make any difference at all. Fisherfolk develope their own niche's over the years, this one is just one of mine. I've done it for so long that it is automatic when I rety (Which I also pre-ty all of my leaders for the day and keep them on a leader card. Yes, they are all Mono 14 # Trilene XT in the green. Yes I even fish it in super clear water and haven't seen any difference.. the fish still hit the bait! ).
__________________
Bob Smith a.k.a. "Porko" (vintage Strike King variety!) |
|
12-13-07, 08:45 PM | #21 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
retying is a must with a 'rig. i have caught plenty of bass on a rig even late at nite..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
12-13-07, 09:18 PM | #22 |
BassFishin.Com Super Veteran
|
Do you use all your clackers on a baitcaster Zook?
-LL-
__________________
I don't see why schools are Public. If all schools were made Private, trespassers would be eliminated! |
12-15-07, 04:16 PM | #23 |
BassFishin.Com Super Veteran
Join Date: Sep 2002
Location: Lexington,NC-Worlds best BBQ.
Posts: 1,945
|
If you wish to use tungsten it may break the plastic.
I don't think that the color of the bead makes any difference, as long as it's not plastic. I use a clacker as well as a tungsten beads, it seems that (for me) you get more hangups when going with any more than the basics. I use a weight,a bead, a clacker on top of a swivel. Note: Stick with black or off colored weights, as well as swivels. Fish other than bass will strike the brass weight.
__________________
Lexington,NC. |
12-15-07, 04:18 PM | #24 |
BassFishin.Com Super Veteran
Join Date: Sep 2002
Location: Lexington,NC-Worlds best BBQ.
Posts: 1,945
|
If you wish to use tungsten it may break the plastic.
I don't think that the color of the bead makes any difference, as long as it's not plastic. I use a clacker as well as a tungsten beads, it seems that (for me) you get more hangups when going with any more than the basics. I use a weight,a bead, a clacker on top of a swivel. Note: Stick with black or off colored weights, as well as swivels. Fish other than bass will strike the brass weight, as well as the shiny swivel.
__________________
Lexington,NC. |
12-15-07, 07:19 PM | #25 |
BassFishin.Com Premier Elite
|
Hm... Never though of that, but it could pose a problem. Anyone else have that problem with using brass colored weights, clackers, or swivels?
BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|