07-10-12, 04:27 PM | #1 |
BassFishin.Com Member
Join Date: Jul 2012
Posts: 15
|
hunter34
I need help I bought a pflueger bait caster I think its either a traid or a
patriarch has 10 bearings my problem is there is no nut to remove the crank and I want diasemble it for cleaning can any one tell me how the crank is removed thanks |
07-10-12, 06:10 PM | #2 |
BassFishin.Com Veteran Member
Join Date: May 2012
Location: Oceanside, CA
Posts: 532
|
From looking at the Pflueger reels and you saying it doesn't have a nut to remove the handle it is a Patriarch the Trion (closest thing I found to a traid) has a cover over the nut with a small phillips head screw to remove that cover and expose the nut.
For the Patriarch and from what I've read you need to tighten the drag all the way down (pushing it forward e.g. rotating it clock wise) Once tightened push the star drag towards the body of the reel and you will/should hear a click, when you hear the click continue to hold the pressure of the star drag down and rotate the handle counterclockwise. Once you've remove the handle I would slowly release the pressure of the star drag as there is probably and spring in there and things will go flying across the room. Hope that helps...and WELCOME to the site! |
07-10-12, 08:02 PM | #3 | |
BassFishin.Com Super Veteran
Join Date: Sep 2009
Location: Dallas, TX
Posts: 4,671
|
Quote:
__________________
There are 3 kinds of people in the world…those who can count and those who can’t. HRN4L |
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|