08-10-11, 11:04 PM | #1 |
BassFishin.Com Member
Join Date: Aug 2011
Location: Mokena, IL
Posts: 2
|
1989 Bass Tracker Pro 17V drain/inlet holes?
New to the site here, but I've been reading up on alot of useful information and thought I should join because I'll be picking your brains on a restoration of a 1989 Bass Tracker Pro17 V.
I would rather not sink the boat when I drop it in for the first time, so my first question is to ask: There are 3 drain / inlet holes at the back of the boat shown in the picture - the one on the far right is the drain plug, but what are the other 2? The one on the far left appears to be a manufacturer install for the livewell inlet?? But the one next to the drain seems like an aftermarket job. Any ideas? The boat has one livewell with 2 holes in it, one up top and one at the bottom. I assume the one up top is for pumping fresh water in, and the bottom for draining. Second question: Do I need to use a plug to keep water in it? Or does the setup keep the right amount of water in there while on the lake? Again, thanks in advance for your help here.. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|