12-29-08, 08:44 PM | #1 |
BassFishin.Com Super Veteran
Join Date: Jan 2006
Location: Morgantown, Pa
Posts: 1,254
|
Copolymer
For years, I have fished with a copolymer line. Now, it seems everyone is using flourocarbon on most of their rods with the exception of topwater setups.
What exactly is the difference between copolymer and fluorocarbon? What is the difference between copolymer and mono (I thought copolymer is mono)? |
12-29-08, 08:48 PM | #2 |
BassFishin.Com Premier Elite
Join Date: Mar 2005
Posts: 8,655
|
wishin' get out the Visine and grab a beverage of your choice while I kill 4 minutes of your evening.
Superlines are thinner than other lines of the same lb test. That allows you to cast farther using a thinner line with the same strength. They are more sensitive than other types because they offer no stretch. However, since they are opaque, they are very visable in the water, causing line-shy fish to be disinterested. Mono, copolymer, and fluoro lines are all similar or share characteristics or one another. All three have some stretch, lower visability (fluoro being the best there), and good all around tensile strength. Monofilament - single strand nylon. Good all-around application. Mono will stretch, absorb water, retain some strength when knicked. Copolymer - usually made up of different nylons combined or a combo of nylon and Spectra fibers. Fishes quite like mono does. Thinner than mono, slightly less abrasion resistant (although some claim it's the other way around), and less visable in the water. Usually a little more expensive. Good for most situations. Fluorocarbon - made from carbon based resins (fluoro-carbon), heated and pressed. Typically not as strong as other lines of the same diameter, however, since the refractive index is closest to water, your line is "nearly invisable" to fish. This allows you to compensate for the line strength difference by upp'ing your lb test and retain some stealth at the same time. SUPERLINES Fused - gel-spun polyethylene is heated, then pulled to make strands. The strands are then compressed and bonded together to make one single strand. Fused line is strong, abrasion resistant, has no stretch and no memory. Braid - typically made from woven fibers of either nylon or Spectra-type material. The strands are woven tight and compressed. This causes the line to be very thin for it's rated breakng strength, no stretch, and highly visable (with the exception of a select few newer braids that attempt to be semi-transparent) |
12-29-08, 09:18 PM | #3 |
BassFishin.Com Active Member
Join Date: Nov 2008
Location: alabama
Posts: 273
|
great answer jb. my only question is are superlines as visable as braid?
|
12-29-08, 09:49 PM | #4 |
BassFishin.Com Super Veteran
Join Date: Jan 2006
Location: Morgantown, Pa
Posts: 1,254
|
JB, now that is very detailed answer . . . but, I still have questions.
Is copolymer less buoyant than flouro? I've been fishing copolymer for many years. More recently, I have really become a crankbaiter. Should I be using flouro for crankbaits instead of the copolymer? Which brand flourocarbon is strong yet limp with not much memory (all the attributes that I like about the copolymer that I use). PS. I didn't need to get the Visine out . . . at least not yet. |
12-30-08, 11:13 AM | #5 |
BassFishin.Com Premier Elite
|
Copolymer is more bouyant than fluoro, most all lines are. Fluoro is heaver than other lines and will sink faster, that's why most don't use it for topwaters.
I've used, P-line fluoro, Seaguar InvisX, Seaguar Carbon Pro, and Stren 100% fluoro. The seaguar had been my favorite, I'll use either, but I think the InvisX is a bit better. I have yet to try their new abrasx or whatever it's called. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
12-30-08, 10:57 PM | #6 |
BassFishin.Com Super Veteran
Join Date: Jan 2006
Location: Morgantown, Pa
Posts: 1,254
|
Is copolymer less buoyant than traditional mono?
|
12-31-08, 02:02 AM | #7 | |
BassFishin.Com Super Veteran
Join Date: Apr 2005
Location: WA State
Posts: 1,783
|
Quote:
The copolymer I have used is Pline's CX Premium and it like other Plines has memory up the Ying Yang. What copolymer are you using that doesn't have that much memory? Seaguar's invizx is among the limpest of fluorocarbons and it is my FC line of choice. It is limp and exhibits to me many traits of mono which I really like. Just keep in mind that FC lines are not equal in the limpness department as some are as stiff as XT. It is not so much FC line's weight that makes it sink. It is its density that makes it sink. As for using it with cranks, I think you would like it. I know I do. Either Mono or FC line for cranks for me.
__________________
ARX "If people concentrated on the really important things in life, there'd be a shortage of fishing poles." Doug Larson (Shimano 2005 Reel Catalog) |
|
12-31-08, 10:30 AM | #8 |
BassFishin.Com Super Veteran
Join Date: Jan 2006
Location: Morgantown, Pa
Posts: 1,254
|
What copolymer are you using that doesn't have that much memory?
Islandbass, I have been using McCoy Mean Green Extreme Copolymer for years. It is a very good line. Super strong, very limp, not much memory. |
12-31-08, 11:06 AM | #9 |
BassFishin.Com Premier Elite
|
After I tried it from recomendations form this board, I prefer P-Line Fluoroclear. It is essentially mono coated in fluorocarbon.
Anyone try any of the other P-Line ones? like CX, CXX, Evolution? BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
12-31-08, 02:38 PM | #10 |
BassFishin.Com Premier Elite
Join Date: Feb 2006
Location: Webb City, MO
Posts: 6,387
|
i have used the CX and i really like it. i have bought all new crankbait rods that have a lot softer tip so i could make up for the lack of stretch in these lines and so far i really like the CX. i haven't used the evolution yet but i have a buddy that uses it and swears that it is a great line.
__________________
You only live once. But if you do it right, once is enough. |
12-31-08, 08:31 PM | #11 |
BassFishin.Com Veteran Member
Join Date: Jul 2007
Location: South Arkansas
Posts: 937
|
i just bought a spool of silver thread excalibur, my 1st copolymer. going this route instead of a flouro. let ya'll know when we start fishing again in feb
|
01-01-09, 07:30 AM | #12 |
BassFishin.Com Super Veteran
Join Date: Jul 2005
Location: Avoca, NY
Posts: 3,508
|
Not everyone is staying with fluorocarbon lines for every lure application.You might find you need at least braid and copolymer lines. Then fluorocarbon if you think you need a sinking line to better suit your lure presentation. Line visability is a joke, maybe green copolymer is the least visable line of any. Ivan
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|