04-18-10, 09:19 PM
|
#1 |
|
BassFishin.Com Super Veteran
Join Date: Feb 2008
Location: Elliston, Va.
Posts: 4,372
|
Fuel guage problem
Any ideas before I tear into it, and remember I am a Va. redneck so when I tear into something RUT ROW is not the right words.
 It was working at the end of last year but not now. 
__________________
The soap box, the ballot box, the jury box, and the cartridge box. keep us free: |
|
|
|
04-18-10, 09:20 PM
|
#2 |
|
BassFishin.Com Premier Elite
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
|
Ron, the float may be "waterlogged" mine were in the cajun. Take it to a dealer if oyu aren't good at sealing the thang back in.
__________________
so many lures, so little time. |
|
|
|
|
04-26-10, 12:08 AM
|
#3 |
|
BassFishin.Com Member
Join Date: Apr 2010
Location: ElDorado, Kansas
Posts: 22
|
I had just bought my boat and the fuel gauge was not working.
I did not know if it was the guage or the sending unit. I took the 2 wires off and touched them together for a second as i was looking at the guage and the guage moved so i know it was not the guage. I took the sending unit out but before i did i marked the direction with just a black line and took out the sending unit. The float on it was rising to the top, there was a little ring that holds it down and it was all the way at the top so i just moved it down on top of the float and everything works great now. If that is not it then it could be hitting the side of the tank or the unit is bad and they are not but about 30 to 50 bucks i think. |
|
|
|
 |
|
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
