03-22-07, 09:27 PM | #1 |
BassFishin.Com Veteran Member
Join Date: Jul 2005
Location: Richmond, KY
Posts: 691
|
quick question for those of you who make spinnerbaits
Do you think this little kit
http://www.basspro.com/webapp/wcs/st...10000_100-10-8 would be good enough to make some skirts for myself in combo's that I can't really find anywhere? I don't wanna go an arm and a leg since I'm not gonna be going all out, just changing the skirts on my existing blades. But ,I'll do what I gotta do to get MY colors. |
03-22-07, 09:44 PM | #2 |
BassFishin.Com Veteran Member
|
That's a good kit, and a nice tool to boot, Cabela's has a similar kit, might want to see if the colors are more to your liking in that kit.
Nice thing about this kit - once you use up all the stuff, you still have a nice tool! Then you can check out staminainc.com, and refill with the skirt pads you will use the most. |
03-22-07, 11:15 PM | #3 |
BassFishin.Com Premier Elite
Join Date: Jun 2003
Location: San Antonio, TX
Posts: 10,141
|
Agree with DP.
__________________
It's happened to the best of them: John 21:3 |
03-23-07, 12:32 AM | #4 |
BassFishin.Com Active Member
|
I make my "own" spinnerbaits just ordering the stuff from Stamina Inc. They're not THAT much cheaper then spinnerbaits off the shelves, but I did get enough stuff to make 5 spinnerbaits for under 30 bucks. Alittle cheaper, but I already had the splitshot pliers that I used for removing deep hooks. Stamina does have some nice Skirt colors too.
__________________
Bass Club '07 season Rookie of the Year runner up. '08 seasons Runner Up. Second overall. |
03-23-07, 03:23 PM | #5 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
i use the same kit and do as reb/damage said. that is if i don't use a quick skirt from strike king..
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
03-23-07, 03:38 PM | #6 |
BassFishin.Com Active Member
Join Date: Jun 2006
Location: Des MOines, IA
Posts: 336
|
i dont use a kit unfortunately. i make mine im sure like DP, from scratch, lead pours and all. its a lot of fun, but costly to get started.
|
03-23-07, 05:18 PM | #7 |
BassFishin.Com Veteran Member
Join Date: Jul 2005
Location: Richmond, KY
Posts: 691
|
the "kit" isn't heads, its just skirt building material and a tool for putting the collars on.
I was just wondering if the silicone was good quality and that it wouldn't be a waste of 30 dollars. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|