01-22-05, 12:02 AM | #1 |
BassFishin.Com Member
|
Medium Rod?
I have got a medium action 7ft spinning rod set up for my carolina rigging. Should the strength of this rod be good for that particular application, or should I purchase another.
|
01-22-05, 12:38 AM | #2 |
BassFishin.Com Member
|
Re: Medium Rod?
No, you usually want at least a MH reod to c-rig, but preferrably a H action rod. But the 7' size is good. I think that it sounds like a good rod for cranking.
|
01-22-05, 01:37 AM | #3 |
BassFishin.Com Member
|
Re: Medium Rod?
I'm with Hula on that one -MH will work, H is better. Â*The reason is when setting the hook you are moving a lot of line as well as a heavy weight. Â*A M action just doesn't have the backbone to get the job done. Â*However, that M action rod will do a great job throwing something like a Shad Rap-the smaller balsa baits are a little tough to throw with a baitcaster but work great with a spinning rod. My C-rig rod is a 7'H action AllStar CRC rod, and I use 50 lb PowerPro on it.
|
01-22-05, 02:59 AM | #4 |
BassFishin.Com Member
|
Re: Medium Rod?
I would not use it for c-rigging, nor would i use it for cranks. I recommend composite rods for cranks.However, that is only my preferance. It is a good spinnerbait rod. I used one of the same length and action for years for fishing open water with spinnerbaits. I prefer short rods for most of my close cover spinnerbait work.
jmho Charles |
01-22-05, 10:44 AM | #5 |
BassFishin.Com Member
|
Re: Medium Rod?
I would use a MH for the c-rig, maybe a Heavy, deppends on how deep I was usually fishing. The rod you have would also be good for topwater stuff, or spinnerbaits. I would use it as a cranking rod also, but that's just me. I always prefer Medium action on topwater/cranking/spinnerbaits. Mostly MH for everything else, except I have a Heavy 7' for My PNJ. I'm not to horribly convinced a Heavy rod is a great thing, (unless you are Pitching and Flipping) especially when you use the superlines like I do. :-/ Anyway, it wouldn't be a bad rod to drop shot with also. I don't do a whole lot of that myself, one of those techniques I need to work on. :-[
Lizards |
01-22-05, 11:25 AM | #6 |
BassFishin.Com Member
|
Re: Medium Rod?
Travis, If you are using light line ,say 8-10 lb test line, it will work fine as long as the weight is light too. Alot of people here use10 lb test and a 1/4 oz. carolina rig for smallmouth. It could double as a drop shot rod also as well as a stickbait, rattletrap, crankbait rod.I do not agree on having to use heavy line and heavy sinkers to carolina fish, but you want enough weight to keep the weight on the bottom when fishing.Lighter weights may slow your retreive down but it will work. ;D P N J
|
01-22-05, 02:29 PM | #7 |
BassFishin.Com Member
|
Re: Medium Rod?
PnJ brings up a good point-that setup might work well for a split-shot rig. Same principal as the C-rig, only instead of a swivel and heavy weight you simply pinch some split shot on your line at whatever length you want the leader to be. I've found 3 split shot work the best for me.
|
01-22-05, 08:08 PM | #8 |
BassFishin.Com Member
|
Re: Medium Rod?
I dont have a heavy sinker on it anyways. I'm going to be fishing it in the 5-10ft range...I ain't going too deep with it.
|
01-22-05, 10:56 PM | #9 |
BassFishin.Com Member
|
Re: Medium Rod?
Im not that resourceful yet to have multiple types of rods made out of different materials for certain uses. All I know is, Fl's got a lot of grass and a lot of big fish. All my rods are 6'6"-7' MH. I also use braided line on all my poles. 8)
|
01-23-05, 08:51 AM | #10 |
BassFishin.Com Member
|
Re: Medium Rod?
[quote author=Rebbasser link=board=MessBoards;num=1106362965;start=0#6 date=01/22/05 at 12:29:48]PnJ brings up a good point-that setup might work well for a split-shot rig. Same principal as the C-rig, only instead of a swivel and heavy weight you simply pinch some split shot on your line at whatever length you want the leader to be. I've found 3 split shot work the best for me.[/quote]
I keep hearing folks say they do this, and I'm trying to figure out why you don't just peg a bullet weight up the line wherever you want it ??? It's a lot less likely to get hung up, and less damage to your line IMO. I always keep a weighted t-rigged setup on the boat at all times anyway, just doubles for the split shot(as you call it), just slide the pegged weight up 1'-2'. Lizards |
01-23-05, 09:48 AM | #11 |
BassFishin.Com Member
|
Re: Medium Rod?
Lizards, The difference is here they are fishing for smallmouth bassusually fishing tube baits. The texas rig weight kills the action a tube has if you have it on a leader from the weight it darts around more. Plug the tube end with a broken senko trapping air in and it now will float on a leader, I have seen some insert packing peanuts in to make them float.Our lakes here are glacier made lakes, most are very deep (one lake close by is 600+ft deep)Not alot of grass grows in large amounts anywhere except for the really small (pond size) lakes. P N J
|
01-23-05, 09:56 AM | #12 |
BassFishin.Com Member
|
Re: Medium Rod?
It might not be ideal for Carolina Rigging, but it will probably work. Give it a try and see. If it doesn't do the job, get a MH or a H. I'd be more concerned about casting a heavy sinker than I would be a hook set. If you're not using a heavy sinker that shouldn't be a problem.
Just because someone else says it won't work, doesn't mean it won't. I have used an ultra-light spinning outfit for worm fishing and it worked. |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|