![]() |
#1 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
I new to the site, but i have seen you guys help each other on a lot of things, so i thought maybe you guys could help me. I got an 80 Astroglass 17ft with 150hp Johnson from my grandpa a few month ago. Anyway the hull is solid but the wood floor is rotting. Since I have to replace it I want to upgrade the wiring, make it a duel batery set up and add a fuse box into the mix. I've looked everywhere for some sort of wiring diagram or something to keep me in the right direction when i start this project. the boat has sat a couple of years and the wiring is the original and is in pretty bad shape, plus over the years its had more than its fare share of southern enginering. I could use all the help i can get.
Thanks Chris |
![]() |
![]() |
![]() |
#2 |
BassFishin.Com Premier Elite
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
|
![]()
sounds like a job for da laser man, zooker, and a couple of others. tell him guys. and welcome to the house-o-nuts friend. check out the get together post and come june 6,7,8th. crestview is just 6 hours from here. about 20 are coming, you'd be more than welcome. mississippiboy... do that thing you did on the other post. i can't seem to do it.
|
![]() |
![]() |
![]() |
#3 |
BassFishin.Com Active Member
Join Date: Mar 2008
Location: JAX,FL
Posts: 173
|
![]()
Hey Man Welcome To The Site. The Best I Have Found Is At West Marine Website To Add A Fuse Box They Have Bullitens On The Website Next To The Items. And If You Run Into A Snag Post Some Pics And Info And I Think We Can Work You Through It. Best Of Luck
|
![]() |
![]() |
![]() |
#4 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
Thanks for the welcome guys. Ill check out west marine when i get home. As for the get together, Thanks for the invite, but Im overseas right now and wont be home for another couple month
|
![]() |
![]() |
![]() |
#5 |
BassFishin.Com Super Veteran
Join Date: May 2007
Location: Ridgeland MS
Posts: 3,923
|
![]()
Welcome to the clubhouse, Fl...buncha good guys on here...sorry, I can't help you with that-thar eelektricty...
Bama, just go to the thread, highlight the web address, right click and "copy", then paste it in your reply to whatever thread you want it to go in. |
![]() |
![]() |
![]() |
#6 |
BassFishin.Com Super Veteran
Join Date: Aug 2005
Location: crossett,arkansas
Posts: 2,777
|
![]()
Welcome to the site bud. As stated we got a unch of nuts on here but you couldnt find a better class of nuts. If possible can you post pics?? I can lead you through the process of redoing the floor and the electrical. Not real hard but time consuming. This if you want to will be a great thread for folks to read especially on the floor resto and the electrical. Lemme know how well you want to do the floor and I will type up the procedure. As far as the wiring it will cost a little but after done you will have a relatively trouble free boat. If you cant post pics I do need to know whether this is a single or dual console boat and preferably the model so I can be boat specific.
__________________
Laser's rule with Merc's doing the pushing..........KEEP THE WETSIDE DOWN AND THE DRY SIDE UP!!!!!! |
![]() |
![]() |
![]() |
#7 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
Once I get started I will post pic as i go. It will still be a month and a half or more before i can even start, unfortunatly
|
![]() |
![]() |
![]() |
#8 |
BassFishin.Com Super Veteran
Join Date: Aug 2005
Location: crossett,arkansas
Posts: 2,777
|
![]()
ok thats ok but what model you have. They built 2 or 3 17ftr's back then and also they where single and dual console models. Lemme know so I can help ya out bud.
__________________
Laser's rule with Merc's doing the pushing..........KEEP THE WETSIDE DOWN AND THE DRY SIDE UP!!!!!! |
![]() |
![]() |
![]() |
#9 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
I was wrong its a 16fter single console tri hull, I called my wife to get the model # and all the stickers except the astroglass sticker have been removed or fallen off over the last 28 years. I dont have any pics of it yet but i will try and find some of the same boat
Last edited by FlFishin2006; 05-13-08 at 07:16 PM. |
![]() |
![]() |
![]() |
#10 |
BassFishin.Com Super Veteran
Join Date: May 2006
Location: Accokeek MD
Posts: 3,315
|
![]()
I used to have a tri hull astroglass in the 70's...
You will need to pull new wire for the trolling motor 24 volt. (heavier) Use circuit breakers or you will watch your new boat go up in flames someday. Use battery trays. Also with the floors do not put carpet back on them. Use bedliner paint.. Capt Mike
__________________
Capt Mike Starrett light tackle guide Potomac River http://www.indianheadcharters.com |
![]() |
![]() |
![]() |
#11 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
![]()
astroglass thats a procraft with better linnage...
zooker
__________________
the godfather.. aml in remission since 7-20-09 |
![]() |
![]() |
![]() |
#12 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
Well I got home about a week ago, and tore out the floors and stringers only to find the whole bottom of the transom is rotten and alot of the wood throughout the rest for the boat is in pretty rough shape. I thought I might still be able to save it but, I done the figures and figured out that by the time im done I could have taken all the money and picked up a damn nice used boat or put a down payment on a new one. So I have pulled the motors and fishfinders and all off and took the hull to the junk yard.
|
![]() |
![]() |
![]() |
#13 |
BassFishin.Com Member
Join Date: May 2008
Location: Crestview, Fl
Posts: 17
|
![]()
oh thanks all you guys that put in your 2 cents. Ill be getting something else and ill probably be askin meny more questions. Thank you all
|
![]() |
![]() |
![]() |
#14 |
BassFishin.Com Member
Join Date: Jun 2008
Location: Crestview, FL
Posts: 38
|
![]()
Well, hurry up and get the new boat so we can get into some of the places that I can't get with mine!
-Aaron |
![]() |
![]() |
![]() |
#15 |
BassFishin.Com Super Veteran
Join Date: May 2007
Location: Ridgeland MS
Posts: 3,923
|
![]()
And don't forget the $5 fine if you post something about buying a new boat, and don't include pics of it.
|
![]() |
![]() |
![]() |
#16 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
![]()
not to mention being forced to wear this next time you go fishing..
![]() lol.. zooker
__________________
the godfather.. aml in remission since 7-20-09 |
![]() |
![]() |
![]() |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|